Dean_mc88

ill take that mate you have a pm

Looking for any standard or race spec rocker covers in usable condition. any colour apart from polished

Pm me with what you have and a price

Looking for a fair few of these as well

Need a passenger side bumper extension as shown in the picture. ill buy both sides if need be.

Cheers mate had my eye on it for a while and I'm setting up for bigger power next year so might as well do what I can while the cars in bits

Thought I'd give mine a little update won't go into too much detail I'll let the pictures do most of the talking.

Managed to swap a bumper off Fordie_glanzav top lad and super helpful.

I made a front slam panel to mount my oil cooler and radiator. Fitted my massive intercooler and sorted out my turbo set up. Also managed to smooth and polish up my rocker cover

A big thank you to fiddlersport as well for selling me a Zisco downpipe to complete my turbo set up

Wow just wow !!

Ok mate cheers

Hi mate do you have the drivers side arch lining ? Tried to on you however says you can't receive any more messages

Found this on eBay with sticker and booklet !

https://www.ebay.co.uk/ulk/itm/322095344181

Anyone have a stock location de cat ?

When I ran this setup , I used a zep racing decat

Cheers mate bit of a wait if I order one of them lol

I bought it off a member on here, on the website it said it kept the original position so I'm assuming my race tech downpipe mustn't be original position

Is anyone using a Zisco ram horn manifold like the one below ? If so what downpipe are you using as I have one from race tech that doesn't fit, it clashes on the EWG pipe

Drove down 4 hours to meet Lewis to swap a bumper! An absolute gent, pointed us in directions to do a few things while we were down here. 👍

if they are all near the ABS it will be hi/lo boost

It may need a reset if that's possible I know I the innovate ones say you should reset the module after so many miles

Pm sent

Glad this is getting fixed ! turbo it now its off the road

http://toyota.epc-data.com/starlet/ep82/60690/engine/1301/?partno=9010508100

Not 100% sure this is it but search the data base

EDIT: http://toyota.epc-data.com/starlet/ep82/60690/engine/1301/13471/

bump price drop again

Cheers Alex, PMs sent

Anyone got a damaged ct9 hybrid or just the housing, housing needs to be in good usable condition

So little update, the car is having a full rebuild with new crank due to the old one being welded to the forged rod

While the engine is out and everything is away for refresh and rebuild im taking some time to clean it up a bit.

Engine bay degreases I will be sanding the rust patches down and re spraying them areas, unfortunately the top slam panel was very poorly welded on at some point so its come off.

polished up the rocker and oil catch can

while waiting on wossner 74.5 piston rings I matched and balanced the pistons and con rods to within .5 of a gram, the new rod I bought was slightly heavier than the others so that again was weighed either end and balanced to suit

some damage

How she sits at the moment

Has anyone got a single gt wheel they don't want ? I have three on at the moment. Like the one in the pic

Was down at TD today spot on as usual and more than helpful !! New hoses and head gasket crossed off the list