nic1.3

thats fair enough i will take a set 4r definite, stick sum washer and away we go

ok ill take sum provisionally as well but i have one question, are these a direrct replacement for the oem parts or do they raise the shifter housing at all? it's just i have my gear stick modded to make it a short(ish) shift and i had to raise the housing up with washers to get enough clearance. imo it would be nice to make a set or an option that come with the additional height required and then get rid of the washers 1. Rick 2. Phil (nanglebadger) 3. 59bhp 4. Silo 5. Streetracer_starlet 6. 4EFTE Sol 7. Nick (Bluebear) 8. DavidAshton 9. montanajr 10. scutch0 11. KevinK 12.stevetony01 13.

i mate i have a sony cdx m88oo flip down fronty one its ok but i would recommend amping everything off it. as for amps i have a JL audio E4300 4 channel amp powering my components, i got the 4 channel amp as it was my plan to run 2 sets of components in my doors as my starlets a 4 door, plus i got a 2nd set of identical components for free due to a computer error.... as for the bass side of things i have a vibe slick A7 digital monoblock amp now after my last one fried itself.... anyway if your looking for a gud amp go for a JL audio it won't die as mine's been belting it out for the last

i have had 2 different sets of lowering springs on my ep91 these were spaxx and now the teins spaxx = these allowed a massive drop of 60mm+ in ride height and looked gud, but were as soft as shit when driving it on. the spaxx springs went soft after a year of having these fitted to the car and lowered themselves another couple of mm's Teins = i got these springs in august and fitted them in stepember last year. they are quite a bit higher then the spaxx id say they give only a mild drop in ride height but still that retain the sporty look, as for handling they are amazing simple as that.

those arch extensions remind me of a 106 gti for sum reason

hi mate u need about 2.5 litres of oil i got one of the castrol oils available from halfrauds and got sum gbox additive aswell and its really smooth now. ok if you want to change the oil there are 3 nuts to look for on the bottom of the box there's a large nut to remove in order to drain the old oil, on the side box facing the radiator there is another nut to remove, this nut is use to show amount of oil u need to put in the box when filling it. and the nut on the top of the box is best got at by removing the cold air feed fro the stock box. so basically remove all these nuts when the box

correct man sorry thats 23300-19495

oh i though that was the problem too so i rang the main toyota dealer here in cork and they confirmed that the part number i gave them was the correct one for my car so im at a bit of a loss as what to do now

yep this is pretty much what i did, its just that the bottom nut wont thread in properly... also in comparsion to jay's filter my new filter has a different part number....do u think that i could have been given a wrong filter my filter part no.2300-19495 jays part no.23300-19395

i paid 56.71 euro before vat for it. im in ireland so its all euros for me in sterling this comes to about £43

hey there i order and recieved a fuel filter from my toyota garage last friday and tried to fit it, when i got the old filter off the new filter wouldn't thread on properly, by this i mean that the bottom nut on the filter would only thread in about 3mm and it shuld thread in like 10+ mm, im curious has anyone had this problem when changing their feul filters and what did ye do besides refitting the old filter thanx for any help. also here is the part no. for the filter i got can anyone check if this is right? fuel filter no.23300-19495

oh well in that sense yes i would agree with u but since geting it fitted there have been no problems with the engine and its pretty much as smooth as ever. i bought it as part of a group buy 4m dave burwash on tgtt and sum of the people who had emf itted prior to that group buy didnt say anything negative bout em and they're were fairly moddd engines so i reckoned it would be safe for mine.

yeah mine will do about 285 miles on 37 litres of petrol this is usually what my car takes to refill it. although i have no idea how many litres £45 sterling will get as im euro im paying about 1.16 euro lately

oh really whats your reason for that?

41mpg that sounds like alot to me like mine had nothing done to it before i got it and i wasnt doing that i've been told that if servicing the car that changing the fuel filter will improve things as these tend not to be done very much. is this true?

hey guys just curious as to what mileage people get on their na and what mods ye have done i just want to compare it to my na which is about 32-35 mpg my mods are as follows magnecor ht leads lite weight crankshaft and p/s pulleys earthing kit

yeah thats fair enough thou, kep looking u mite find sumthing.

hey man i was looking at the yahoo auctions for the ep91's and there are sum apexi exhausts and other makes on there, also acouple of the traders on there ship internationally if i remember rite, u will hav to luk 4 a bit to find em thou. i went through the yahoo link on toytuning on TGTT oh and the yahoo systems are alot cheaper than the blitz system

hey just curious what kinda beans are you looking for it and whats your reason 4 selling it?

the paceetter are available 4m this online site http://www.speedyperformanceparts.com/perf...67011&Nty=1 not sure bout international shipping tho

hey sorry for the slow reply ok i back tracked on the trd site. and the site is only a reference for parts ant numbers. under the distributors for the uk it says fensport. www.fensport.co.uk they dont have the hg listed but contact em and see what they say. Also just out of curiousity how much extra power wuld get from this and are there any additional mods needed?

sorry i don't kno how th do those clicky things but here's the link to the trd HG trd HG http://trdparts.jp/english/parts_engine-4e.html cruise HG http://www.greenline.jp/catalogue/bccatpar...category=engine all trd parts for the ep8/91 apparently http://trdparts.jp/english/list_ep.html

yes they do, i believe it's 0.6mm i remember seeing it on a parts list for the starlet/glanza also cruise do thinner head gaskets and in defferent thickness' as well you can find the cruise on the greenline website

yeahsumthing simple will do me fine, i wasnt looking to imitate a turbo setup. like they say less is more

yeah i will include that alrite i was just thinking of getting sum piping and silicone joiners and experimenting with it until i was happy