Jump to content

koolza132

Member
 View Profile  See their activity

  • Content Count

    178

  • Joined

  • Last visited

 Content Type 

Everything posted by koolza132

  1. koolza132
    Quick update on the thread, cars still at Racetech After problems with the Power FC So had to rethink the engine management system and decided after research and talks with others that a DTA would be beneficial in the long run With K20 Coil packs and uprated sensors etc. I went for the DTA60 Pro as it has a few extras that the 40 didnt like anti lag and Launch control. Ive also managed to source a GI bonnet and a TOMS adjustable spoiler. Im also looking at updating the coilovers to BC's and waiting to find out if WMS are going to start supplying the 4pot Brake set up, if not i will be looking
  2. koolza132
    Ive got all the rear plastics and seat belts etc. im from kent.
  3. koolza132
    See a very clean looking GT turbo in Cheriton area anyones here?
  4. koolza132

    Any one here running a DTA40/60/80 need some advice on a set up im going to run on my car. TIA

  5. koolza132
    stage 2 complete turbo kit Multi angle valves and seats Decking block (recommended)Install AVCR not including setup. Install wideband, including welding bung into exhaust. ECU fit setup map AVCR setup including boost by gearShort route intercoolerBalancing Oil pump Water pump Head gasketHead studs ACL bearings Skim head Block notch for scat conrodsValve Springs shimmed and fittedA couple of the guides in the head need to be changedRods to be honed out to suit little end size of pistonsThe valve clearances setNew Clutch Fly Wheel skimmedEngine mounts fittedRepair wiring loom/Tidy unneeded conne
  6. koolza132
    It wasn't me who spotted it but if it was in folkestone then most likely theres not many around here and if there are there black lol
  7. koolza132
    Today spotted a Blue EP82 in folkestone any ones here, not many left around these areas any more?
  8. koolza132

    Who owns the BLUE EP82 In folkestone area????

    1. typh183

      typh183

      is the number plate n206svy?

    2. koolza132

      koolza132

      Probably mate only blue one seen round here

  9. koolza132
    This build thread is still ongoing. At the moment the cars at race tech for the engine build,. should be on the road in late january early febuary and i will get some pictures of the engine bay and exaust work. its going to be running td04 hybrid stage 2 with race tech manifold, full exaust system, APEXI Power Fc ecu, APEXI boost controller, AEM wideband. Also it will have Uprated cruise valve springs and most of the common engine modifications that go with a forged build aswell as a new comp clutch to go with the Lsd gearbox that was fitted before it was sent there. Keep you p
  10. koolza132
    Thanks, When its back from being rebuilt it will get final touches to body work like buffing and front splitter ill keep the thread updated as things happen
  11. koolza132
    Car has been now sent to race tech to be forged, hoping for over 300bhp will get some pics when its back and maybe a vid or two 👍👍
  12. koolza132
    As above apexi fc with hand commander or any other standalone ?
  13. koolza132
    Has this sold?
  14. koolza132
    Need a decent ep82 wiring loom
  15. koolza132
    In needs of a loom, I am looking for the connection block that goes into the ecu as mine has started to become loose, doesn't have to be full loom as long as the wires are strong and anout 5 inches long It will do
  16. koolza132
    Wiring loom?
  17. koolza132
    Wiring loom?
  18. koolza132
    And i know i have to replace them sharp corner piping on the FMIC lol just havnt got round to doing it yet!! LOL
  19. koolza132
    So i decided while collecting the engine parts i would have the car resprayed due to the paintwork not being in the best condition as well as fitting the side skirts and rear lip which would need painting anyway here are some pics of the whole shabang. Have a front lip on the way but due to the one which turnt up the day before being broken had to be sent back, so will add that on when new one is sprayed. have ordered a new tial wastegate due to the wastegate on at the moment being an unbranded one, and now waiting for the bigspend on a new Sta
  20. koolza132

    South east Kent starlets/glanzas fb page for all from kent area if any ones interested.

  21. koolza132
    New parts have arrived, Gear box turnt up just need to get round to getting it fitted (Quaife LSD)!!
  22. koolza132
    Not sure tbh haven't had it mapped, was already td04 when i bought it but was in a right mess engine bay wise, I'm getting it resprayed as it doesn't have the best paint work being 20 years old so will be getting a fresh lick of paint, just had all the stuff to forge it turn up now just to save for the build, has nearly every handling mod you can do to it and a full cage all just got some yoko prada tyres its still a running project and will be done hopefully by next year fully forged body kit rear boot lid mods running a billet td04 or Gt28 going for hopefully 320-350bhp
  23. koolza132
    Ive not seen that yet only ever see the white ones lol have to get some photos some time with the other folkestone starlets
  24. koolza132
    Nice thread, car looks nice, whats the boost like on the VF24 like spool time etc
  25. koolza132
    Yes mate it is
×
×
  • Create New...