Adam M

I went 5w40 with my forged engine was recommended by TD and blueprint filter

I would say it's the rings , try put some oil down the cylinder walls and see if the compression rate rises abit. If it does then it's the piston rings need replacing. Also check if u have blue smoke coming out exhaust is another good indicator to rings. get a friend to look . Could also be HG has split between 2 and 3 although i'm not 100% sure on how you would check that.

I would say oil pressure mate mine did it after i put a new engine in and turns out the Wire to switch was old and corroding

Yeah , i'm thinking the problem could be that the space plate between gearbox/engine is bent and maybe thats why its made starter motor not line up right hense the crunching when statrtimg car up

Is The ebc sold?

Ok thanks for info

Ok thanks for info Really strange no matter how i connect the motor it grinds like hell against flywheel You never had any problems td04hybrid? Many thanks Adam

As above looking for one that can hold 1.4 bar of boost Many thanks Adam 07720391230

I put a gt motor in my glanza and the starter motor keeps crunching against flywheel Does anyone know if i need to purchase a starlet gt starter motor ? As im using the one out of my glanza

Keep getting fault code 12 on my glanza Dropped a new engine in recentley and put new dizzy cap/rotor arm//leads Not sure whatelse it could be If anyone has had same problem do let me know on any fixes Thanks Adam

Hi all Recentley i bought a forged motor out of a starlet gt and put it in my glanza , i'm using glanza gearbox and starter motor. Basically when i start the car it makes horrible crunch/whine , If i loosen the starter motor off a little it starts fine, anyone else had the same issue ? Do they run a different starter motor? Not sure how to solve the problem Many thanks Adam

I got 2 rocker covers can have for £20+postage and fees

I have stock cams/buckets pm me offer

Just put a ep82 in my glanza and all fits/works just the two sensors under dizzy cap need swapping to fit your plugs on ep91 loom

Hey td04hybrid Do you still have the turbo kit? Or any td04 manis/decats? Let me know buddy Many thanks Adam

Do you have the turbo kit still Cheers

Could i get 2 of the fromt seat bolts that hold em in Let me know Many thanks Adam

Hi , could you sell me two of the bolts that hold front seats in Let me know Thanks allot Adam

I am also in need of 2 glanza seat bolts if anyone has any knocking about? Many thanks

Ello mate pm'd ya Nice looking glanza!

Yeh think im going to try rebuild her mate Should of done from buying it Cheers Adam

No worriea bud Gl with the sales! Cheers Adam

Ok thanks stu and lee , any idea what usually causes it to happen? There ment to be forged rods and the oil level is fine Strange Thanks Adam

Ok lee thanks for the shout.

Hi all! Need some 2nd opinions I was driving home when i gave the car a boot in 3rd , as i climbed revs i noticed a sudden small power loss. So i returned to eco driving as you do then noticed as i dip the clutch the revs shoot down ( car tries to stall) but was fine under load I was then followed by a knocking noise coming from engine (quite loud) It sounds like a rod down below to be honest but my knowledge is only basic. The symptoms from crawling home ( about a mile) was a loud knock and revs dropping when changing gear. Oil light flickered a few times. Whats everyones opinion? Many th