Duduglanza

And from where i can buy them please?

Can someone explain what are det cans? And which pin is the knock signal int the emu. Thanks

How can i log knock signal on the emu? I know its resotant and 7.66...but then what shall i do?

Check the thread on tgtt... there is a emu thread long 22 pages. There is a diagram in of them

Or google it

I managed to take everything off and checked deeply for leaks.. i tightened all fitting and put everything back on. Now idleing fine... altough the tb leaks a bit from one side to another it didnt effect. To idle it still needs a slightly gap or else it will choke.

I managed to take everything off and checked deeply for leaks.. i tightened all fitting and put everything back on. Now idleing fine... altough the tb leaks a bit from one side to another it didnt effect. To idle it still needs a slightly gap or else it will choke.

Its universal buddy

There is something wrong.. you need to check all parameters and zero outthe ignition and injector table. If this doesnt work .. you have someting in the wiring.

Anyone running a version E without the injector adapter? Runs good or still need it? If someone has a wiring diagram pls link me . Thanks

I cannot put the standard back on.. flanges don't match. I have seen a couple of cars using these throttle bodies. I dont know what they have made on them to fix it

I tought its the only airway for the engine not to choke up...

Is it normal to a univeral throttle body u leak air from one side to another from the small gaps where the shaft is?

Ok thanks guys

But if you dont turn the engine.. nothing will move.. right?

Do i need to time the engine again or just remove the belt and replacem

By custom i mean a universal tb that comes with zisco manis. I Will try that and check more on the leaks.

I just fitted a zisci intake and now its idling about 1500/1400rpm at normal temps. I checked around for leaks but found nothing. Throttle body is custom and the idle screw is all the way out therfore i cannot decrease idle anymore.

Any ideas or its normal?

Any around

Bump

Im using an ultimate

Oki ill try it then

those are related to the map sensor.. make sure it's working fine..

Anyone knows the steps how to set a stanard tps with a bigger throttle body? http://www.ebay.com/itm/NEW-UNIVERSAL-65MM-THROTTLE-BODY-HIGH-PERFORMANCE-ACRUA-MAZDA-FORD-CHEV-/281393501471?pt=Motors_Car_Truck_Parts_Accessories&hash=item41845c151f&vxp=mtr

Thanks guys

I dont have any place to fit pipes in ny throttle body... just from the plenium..

What are these pipes for? I changed my throttlebpdy therfore i cannot use them anymore. What should i do with them? Loop them or just leave them open?