Duduglanza

i have one fitted.. it makes difference!

70 psi on startup and arounf 20 warm on idle. 10 50 oil

aftermarket gauge mainly.or try hoocking a gauge instead of the sensor

the oil light lights up if it senses low oil pressure, you can have full sump of oil and still lights up..

but if you are having oil and abs light i must say its something in electronics

thats what im suspecting.

the test was done with wide open throttle. is it possible to be purposely done? and be that low? would a teaspoom of oil raise compression by 50psi? :/

its the cheapest one on ebay.. maybe that whats the problem

The engine runs perfectly fine.. pulls great .. no smoke no missfires. thats what weird :/

im getting 125 psi on warm engine and 175 psi with a teaspoon of oil.

the problem is i had an engine rebuild 5 years ago and i didnt have idea on the things he done. i know they are wossner low compression. i know that i have an athena head gasket.. but dont know what thickness. had even done some headwork too...

im not feeling any loss in power i just did this test since i bought a gauge for my friend.

should i take all the plugs out or one at a time?

i will try and test my engine on warm and post up the results.

Will do. by the way its a 5e block

Even for low compression pistons?

Done it on cold first

Yes done. Thanks

125psi on all 4 cylinders on low compression pistons.

Ok thanks

Anyone know the best way to make the test and get accurate readings? I have the gauge

Thanks

I have a G6 6 speed corolla gearbox in one of my GT's

Do 2nd gear crunch?

I know its not simple. Just need to confirm

I was told that mr2 / celicas gbox are done but i have never seen on.

Has anyone here managed to swap gbox from another toyota car? Im tired of rebuilding mine and changing syncros every now and then to have decent gearshifting

Done

Anyone?

From where are you taking the boost signal? Compressor housing or intake manifold?

Thanks!