Good Evening Ladies & Gentlemen! Small update, I've made a mount/stand for my boost controller! I wanted it to sit on the dash preferably, and those who run a GFB G-Force understand the struggle of it being flat backed, no bracket out there to dash mount it, so I decided to fabricate one up! I had some 2mm thick sheet steel laying around so all drew out a template & cut it! Heated the metal up, not so its glowing, but f*cking hot, and used a soft mallet to shape it into a 90 degree angle, a quick quench & there she was! I then decided to use the angle grinder with a sanding disc to remove any surface rust, and de-bur the edges, it actually looks pretty sweet! Some black mastic tape & banged it all on the dash, after re routing the vac line & wiring loom for the controller! No further update regarding my lights tho, they've conked out & me Alex & drongo are struggling to figure out what the f is going offxD We fixed the sidelight problem tho, turns out they was getting back feed off my water temp gauge, because whoever did any aftermarket wiring on my car wants a slap, with a brick, and in prepared to do the dishing out, my pet hate! Bodgeing! Ahhhhhh! Enough ranting, here's my controller!