-
Content Count
752 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Posts posted by adzy
-
-
Looks good!
I had tein springs in my glanza and they were dead on
Had considered doing some lanes rallys myself at a time, mate is building a puma for them atm
-
i take out the efi fuse for 15mins will clear the codes
About 15 seconds is all you need to remove it for to clear codes
-
It's the fuel over here too Colin, mainland can get 99 ron
In the north here can only get 97
And it's even worse down with you's
-
Sounds good Chris!
-
I made 175 at 0.8 bar
190 - 200 would be normal at 1 bar
More has been achieved tho, just depends on engine health and other factors
-
As in the backing plate?
I priced them in Toyota, £90 + vat each lol
And you can't seem to get them anywhere else
-
Yeh hi/low boost solenoid
And yes you can bypass it.
There was a thread today or yesterday with pics of how to
-
Use a drinks can as a temporary catch can, you see some people using monster or redbull cans.
If you just put a hose from your rocker to the inlet, as soon as you boost it will be pressurising the crankcase
-
Where on the net is the best place to buy import plates?
Ebay
-
You can get a ct9 adapter kit, not sure who makes them new but have seen a few 2nd hand ones recently.
If your still using the standard mani I would just buy a td04 kit if that's what you want to run. The adapter kits are only worthwhile if you have a good aftermarket ct9 mani imo
-
Wastegate stuck open?
Pull the actuator back and forward to make sure it's free
-
For a temporary fix if you unplug the fan switch the fan should come on constant.
Mine doesn't as I have a broken connection somewhere so I have to turn the heaters on in the car to keep it from heating lol
-
Yeh got mine blasted and powdercoated
-
Nice work chris!
-
I priced new backing plates for my glanza from Toyota £90+vat each 😂
-
Thanks lads!
-
Very nice! Lots of nice upgrades you've got there! Love the wheels!
-
So this happened...
Fitted them last night and Got alignment and all sorted today.
Just need to hit the twisties now to test them out!
Haven't touched the height yet as I'll wait and let the springs settle a bit, but might just go a tad lower.
Have them on softest setting and they are nice and comfy for daily driving so far
-
Have you tried greenlight?
Def worth trying, I saved a fortune with them.
-
-
Is it a spigot to go between hub and spacer you need?
Glanza Hub is 54.1
-
Fair play some work going into this!
-
nice job mate...looks great !!!
Cheers sacha!
-
gonna make a race spec one myself look smart adam keep up the good work
Yeh I've had this rocker since the day we went karting and only ready to fit now lol
replacement headlight/main beam bulbs HID PIAA ?
in Exterior Design
Posted
Osram night breakers work well for me