adzy

That's smart!

What is the tread size for the thermostat housing? I might do that instead of cutting my brand new roose hose in half

Safer buying new, roose motorsport have a lifetime guarantee with their hoses

Yeh mine had the offset pin so had to buff one down to get to fit

I got red bulbs in a local motorfactors and they're dead on. They weren't the cheapest tho, think they were about £4 each

I've had a set for sale for ages, just sold them today 🙈

It's the same as power steering belt for an n/a starlet, motor factors should be able to get that easy.

They tend to struggle sometimes with imports

0.65 bar

do you know the name of the place ?

Clarke bros

You can get a clutch re-lined.

Place in Belfast does it, but that's a bit far for you!

Or take the hub nut of then put the wheel back on so you have something to grip to pull and wiggle it off

Can get a 24k gold plated one for £30 off ebay lol

Yeh if you want one twice the size of a starlet one that is, they're a lot bigger, would look stupid on a starlet

Everything you have will be fine for 1 bar on a ct9, the only concern would be how lean or rich the jam ecu would run.

You could take it to a rolling road and get them to check your afr for peace of mind. Alot less than the price of a wideband

that's a massive increase really do you know what cams he used?

and as for the downsides that's to be expected really for what my car gets used for driveability doesn't really upset me

Speed vision, not sure on the specs of them though

Stevens glanza went from 260 to 300 on a td04 with just cams.

However he said it was a lot more lag, and very sore on fuel. So prob worse for driveability

What was it? Gonna be fitting my rear arb soon, so wouldn't mind knowing what to watch for!

Sorry mate but some of us on minimum wage dont just have £400-500 to spend on a racetech or a wepr manifold and are just doing what they can with the money they have...

You're just right mate, if it does your job that's all you need

Is the newer toyo sports not decent quality? They look decent from the pics I've seen.

Something tells me 5E Colin possibly got one recently? Could be wrong

UP FOR SALE AT THE RIGHT PRICE!! Did I just type that pm me serious offers if interested. There are a few minor things that need doing but she's a great V!

Slap yourself!!

I read somewhere that your idle might need adjusted after removing it. But mine hasn't been started since so not sure

Or YouTube videos of turbo spool to see if it sounds like that lol

Boost leak, check all your joins on intercooler pipes. Had a similar noise when I fitted my front mount

Aircon stuff, ripped mine out this week

Also bought from James, Good price and fast postage. Was also helpful and went and found me info about fitting. Would Recomend and would use again

The small clip that holds the actuator to the wastegate arm? A small circlip is all it is.

What happened with the front mount? How badly wrong where the pipes?