morgan

Bump

To gat back on topic what ECU's are people running and what can they do.

Are they stand alone or piggy back?

Can they do closed loop boost controle

Anti lag ect ect

And what about engine, forged ect ?

I know AMD only do euro cars, already asked them and they said to go next door to TDI who I thought looked pretty good, why should I not use them ? I will have to have a look in to the other places you said mate sounds good thanks for letting me know

Hi everyone

This is aimed at the starlet owners in Essex, want to know where people have taken there cars to get an ecu fitted and mapped, what ECU you are running and your set up really.

Let me know where you recommend

I have sent a pic to them and that said my hose is from an ep82 apparently and the one they sent me was for an ep91 even though my car is an ep91, the rad is the ID-works rad but the old hoses fit on there fine no problem

I will post some pics up when I get to a computer of what I got and what came off the car,

Problem I have is that I got them about 3 months ago and didn't bother to check but if they have sent the wrong products then the 30day Refund does not matter as they sold the good not as described

Oh right, if I send you a picture of the hose I got of the car can you confirm that it is the same as the other hoses you have seen? I know you run jdm-ep so I'm sure you have see a few of them lol

Is there a difference between the radiator hoses for an ep91 and an ep82?

I have ordered the radiator hose from Boostjunkies for my glanza but when I come to fit the bottom hose, it was the wrong hose, I sent photos over to Boostjunkies and they said I have the bottom hose from an ep82 on my glanza ?

Can anyone help me out ?

Thanks a lot

Anyone have one or know where I could get one please ?

Nice one, I thought so but wanted to be sure

Right guys just put on my new WEPR manifold and front mount, in the stock system I know that on the actuator there are 2 pipes coming off it, one connects to the compressor housing and the other to the intake pipe.

My question is now I have no intake pipe where do I put plumb the other pipe to ? I was thinking just to leave it open ?

Thanks

Bump

Ahh be going to need a fully working one mate sorry

Need one ASAP

Bump

Nice one mate thanks how much am I looking at posted?

Hi everyone I'm after the kph to mph converter that goes on to the gearbox.

No crap please needs to be in good working order

Thanks for looking

Is that that same for the manifold to turbo studs ?

Ahh fair enough mate

I have heard of people making 220 on a blitz k1 so it hopefully will be possible

Ahh I looked it up emb is emanage blue and emu is emanage ultimate but still what am I looking at price wise between the 2 and is it worth it if I'm only running 200whp ? All help appreciated 😊

Sorry guys but what is emu and emb ? What's the difference in what they can do and cost and what examples are there, I presume emanage blue is emb?

I didn't get the oil line with my kit because I have a brand new braided line so I do know the i will need a longer pipe. Any one know anything g else I can use ? Just want a rubber hose tbh that works with hot oil

I have been told that the factory hose will be too short as this kit is non stock location, any idea where to get Fluoro lined silicone bends ?

Can anyone tell me where to get a good quality hose from? Just need it to go from the turbo oil outlet to the sump as the factory hose does not reach any more. I have been told silicone will be ok and others say it won't due to the high temperature of the oil

So if I was to get my hands on a kph to mph converter I would be all set, is there anything else the blue can do apart from ignition and fule maps ? Was thinking of putting a gfb g force 2 ebc and having 3 boost maps in there (low boost 0.5, road use 0.7 and sport at 1 bar) was told this is possible. Yer that's what I aim for just a car with a bit more power but the main thing is to not have to fix it all the time lol