ChrisLeeBoost

Yeah have vacuum going to compressor housing from bottom port on WG, and yeah heard screamer last night nearly jizzed myself but it boosted to .7 which scared the shit out of me because I thought it was gonna go bang

Glanza pal

Must be faulty springs then because I've tried both of them on they're own and car is overboosting badly

Sorry bringing an old topic up but I've hit a brick wall again with the car, I've went external wastegate setup wepr kit and a turbosmart wastegate, now the car is boosting to about .7 or so is that high or will it be okay on stock fuelling?

Have a turbosmart external wastegate and I tried both springs that it came with and the car is overboosting? With the larger spring in it was boosting .7 bar on low throttle and with the smaller inner Spring installed it's still overboosting a bit but on the box of the wastegate it says it's 14psi with both springs installed ? I'm on standard ecu for the moment waiting on a harness for my emb, but just want to run the car on Spring pressure on low boost say 7psi but neither of the springs are giving me this and I'm afraid the engine will go pop? Any help lads sick of having no car

I second that gainzy 300 is more than enough IMO

Sard k26 kit good for 350ish

There was a big one and a small one the big one was 105mm in length and the small one was 60mm in length not sure which one to go with as the chart is confusing on the turbosmart site

Have you got any links for these mate sounds ideal less messing around than installing SLD

Bought it second hand and on the box off it says 14psi so I'm presuming there's a 7 psi inner and 7psi outer ring so would I be better off running the smaller spring or bigger?

Thanks lads

Recently bought wepr kit and a turbosmart wastegate now I'm led to believe that the wastegate has two springs in it, is it possible to remove one Spring so I can just run the 7 psi spring and get the mani and few bits on the car until I'm going to get it mapped? Also where does the second port on the wastegate have to be ran to with vacuum hose? First to a boost pressure source and second to where?

How do I go about this mate thanks

Does the emb remove speed limit or can it be mapped to remove speed limit?

My god that is sweet Dec nice addition

Lovely stuff mate good to hear hope to see more of the car maybe in the flesh when she's up and running fully 😝

As above says lads lookin for a good td04 external wastegate mani downpipe and screamer, and looking for external gate to go with it based in Ireland lads and badly stuck for a kit to get car going any replies greatly appreciated

Serious build Dec absolutely love the black on yellow with carbon bonnet suits the car down to the ground and some seriously tasty bits thrown in there ;)

No the one I was looking at still on car not on adverts bud, staying td04 anyways

Possibly oil pressure sensor?

That one on boomslang looks the job, will make things a lot easier if I ever break the car for parts it'll be removed and make it easier to remove

Just seen a zisco extension harness for the ep91 it has three plugs on it but the ecu has 2 ? The ep82 extension harness has 2 plugs on it so I'm a bit confused is the ecu that I have made for ep82s or which one should I have?

Hi lads I'm in the process of fitting bits to get the Glanza mapped, I've an emanage but no harness and I've purchased a plug and play harness off a lad but I recently realised its just air and fuel control in the harness and he said he can add the ignition harness in for extra cost but do I need the ignition harness I'm presuming I do before I buy it just thought I'd get some help with it thanks lads

Good price too will give him a shout thanks bud

Also is it completely necessary to run a rising rate fuel pressure regulator with a 255 pump and standard injectors on a bar boost running td04? I've read a few times that the standard regulator will cope quite happily unless your running a larger fuel system with bigger lines

Looking for greddy emanage blue no harness needed just unit must be in perfect working order based in Ireland