Giannis

Ok.....i am looking for roof panel with sunroof Thanks for reply

Is your car for breaking?

Check your inbox Keri need a brake kit

Ep82 two plug ecu Ep91 there plug ecu

Looking for a pnp AT ecu for ep91 Is it AT or MT?

Final drive is 3.702

With correct wheel size 5th gear and 3000rpm I think it's around 100+.....correct me if I miss something 4efte comes with c52 on starlet gt turbo and c56 on glanza Also some versions off gt turbo comes with c153 gearbox....if I remember it has the longer top gear ratio(0.725/1) I find your box c160 very good but it is weaker than turbo boxes.....

I don't think that you can travel at 240 and 6000rpm 105 at 3000rpm is short....glanza and gt has longer top gear ratio....

Yes very impressive....what about high speed ratios?how many km/h with 3000 rpm and 6th gear?

Nice what kind of gearbox are you using?

I have the k1 200v jam manifold blitz decat....hope to make something good

Thanks phil

Thanks for info Phil What horsepower will I expect at 0.7 to 0.8 bar?

I am trying to find one but I think it's impossible Thanks for reply

Thanks Phil Can the stock ecu support k1? What other modification are necessary?

My biggest problem is ecu because of my ECY (automatic transmission) Most of ecus blitz jam for example are designed for manuals Thanks for reply

I am planning to install the blitz k1 turbo Can I retain the stock efi pipe stock intercooler stock ecu stock stock injectors an stock blow off valve? Ps want to run it 0.7-0.8 bar

Thanks for reply

Thanks for reply but need also the torque turbo to manifold and downpipe to turbo.... Thanks a lot

As the title.... especially 1 exhaust manifold to cylinder head 2 turbo to exhaust manifold 3 downpipe to turbo Any help appreciated

??

Very good.....and lovely condition with 4age engine Keep going

Thanks for reply I bought a pair of 98 spec glanza I there is enough space for the optional armrest

Is it capable fitting armrest in a 98spec starlet? I mean is there enough space between the seats for the armrest?

And some new nuts and gaskets