ChineseMafia

hey dood can i get the part numbers for the 5EFE head bolt and the 4EFTE head bolts also can you supply this M9 Tool T09043-50080 ?

hey guys i really ned to no what are the physical dimentions of the front disks for the satrlet GT thanks guys

KOOL RICK ILL HAVE IT TELL ME WHAT IT CONTAINS

are all the oil filter threads for toyota the same on all engins?

ok guy ive read oll the threads on this and from what i gather...its not an easy swap however i have friend who bought a car from a guy who took the 5efe bottom end 4efte piston and 4efte head and ECU put them together and the car runs fine with the ct9 onthe stock manifold and he uses a standard 5efe cluch the car runs fine what im asking is this will every thing from the 4efte bolt on to the 5efe block by that i mean the alternator, power steering pump ac compressor etc all from the 4e. will they mount onto the 5e block provided that ALL you have from the 5e is the bottom end that is f

the 5efe rods are longer than the 4e ones and even if they were the same its the crank that makes the didderence in displacment not the rods

so will randomly putting them back affect perfomance ?

can i get the price for the bolts and a link for the tool please

yessssssssssssssssssssss men youve made me feeel so much beter rick thanks bud PS clear you inbox so i can PM you Ive been trying for days

hey im looking for a set of head bolts and the removal tool can you help?

ok guys com on what can we do about this cause this is big im down to my last engin and ive had enough problem already hey rick any input on this ?

what same order ?????????? come on guys help us out here

hey guys when i opened up my head all my shims fell out will i have a problem when i have to put them back . is ther a specfic order ? the guy at this link just got me worried http://www.bajanchameleon.com/rebuild_price_list.html

any chance on getting a soft copy of that mabe a pdf or somthing?

so can i run the car without them ?

hey ddo what size is your inter cooler piping?

starlet rick indicated to me that the bearings and rings were all the the same so now im kinda confused

do u Know of any body who would be able to mate the 2 turboes ? i could provide the ct12b

hey i have a couple questions about a hybrid i was taking a stroll yesterday when i triped over a ct12b (that whats writen on it i mean it kinda big ) both the exhaust side and the compressor side were verry oily the turbo had a 4 cylynder manifold on it and a decat pipe how evea the manifold which is a logg style cant fit my 4efte moving on i was once told by a guy that the only difference between the ct9 and ct12 is the exhaust housing as i had never seen a ct12 i dont thing that this is true for the 12 b as it is significantly bigger than my ct9 my questions 1 can the ct9 exaust

once again thanks rick that diagram would be greatly apreciated

hey guys i juts got all the parts together for my engine rebuild how ever i just need to ask 2 more questions in an early post i asked about the torque settings for the head bolts in the repy i was to to torque them in order so question1: what is the order when replacing head bolts question 2: what size on my filler gauge would i use to set the tappets ? thanks guys

i got this info fron another page i can remember where but the first line has me confused Cylinder head bolt - first, 500kg/cm ; second, turn 90 degrees Cylinder head x camshaft bearing cap - 130kg/cm Cylinder head x number 2 idler pulley - 280kg/cm Cylinder head x cylinder head cover - 70kg/cm Camshaft timing pulley x camshaft - 510kg/cm Cylinder block x number 1 idler pulley - 185kg/cm Cylinder block x crankshaft bearing cap - 580kg/cm Cylinder block x rear oil seal retainer - 75kg/cm Cylinder block x oil filter union - 250kg/cm Connecting rod cap x connecting rod - 400kg/cm Crankshaft x c

i find this to be verry unfair that this question has been posted twice and yet no one has found it neccary to help the fellow brethen by answering a simple question all we wanna no is : do the 4EFE and 4EFTE engines use the same bearings and rings also do the 5EFE and 4EFTE engines use the same bearings and rings please please please some one help me im in a bad way with my engine

can i get some pic of the evo powered ep82?

hey guys check this one out will this do the trick ? http://cgi.ebay.com/ebaymotors/SARD-Fuel-P...p3286.m20.l1116