abbott

this is a not a for sale thread just wondered if i would get much interest in parts if i desided to strip as much as i dont want to. PLEASE SEE MY MEMBERS GARAGE IF YOU DONT KNOW MY CAR ENGINE (*COMPLETE*) ROB BARNARD SPEC ENGINE (SES ENGINEERING) 4E-FTE *Wossner Forged Pistons *Wossner Forged Rods *Fully Balance Bottom End *Gas Flowed and Polished Head *2mm Cruise Head Gasket *Light Weight Crank Pully *Ported and polished inlet manifold to match head *NGK Iridium Plugs (Heat Range Cam cover with custom braided line and oil catch can Sard 550cc Injectors

the rest

8/5/09 Went to AFR Tuning this morning just to get my car remapped due to have it checked out a few weeks ago at TDI Hub dyno day made 238whp at 1.4bar and it was leaning off and was not right. Mat within 5 minutes picked up how bad the map was, so he got to work and got it sorted i didnt really care if it lost or made bhp just wanted it to run safe and sweet. Had a few traction issues on the dyno with it spinning up in 4th so had to be done in 5th. Results made 317bhp 256lbf.ft at 1.6bar so very happy the way its running now

8/4/09 Bought this custom inlet manifold from a member which was made by ROB BARNARD (SES ENGINEERING) some time ago on Adamans 330bhp starlet. well it was not the best condition manifolds when arrived so i decided to give it a good clean and change a few things had the front face vacums removed and smoothed over and put in the back. then got it powder coated. it will be getting fitted soon and booked in for a mapping at AFR Tuning on the 8th may. cleaned up after i got it and then powder coated

looks good matey Give us a bell

many thanks dude for mine spot on

yes mate i do whys that? thanks bud

21/2/09 All back together

yes mate it is 780bhp on race fuel it is

13/2/09 Took my mate to norris to pick his evo up and while i was there got my geomatary set up and what a differance its made. 14/2/09 Recieved my rear anti roll bar from steveep82 this week. fitted it and tested it out that night and its made a big differance at the rear. 19/2/09 have had a little leak on the oring on the water pump so repaired that and while stripped down i thought i will give the inlet and throttle body a clean up and a lick of paint. Cleaned engine bay, also made a new FPR bracket up.

30/01/09 Drop links turned up thanks to Mr Burwash and fitted Lsd today. 01/02/09 Fitted anti-roll bar today and a few pics later on when it was snowing

17/01/09 Fresh pics of the car after a good clean from all this rubbish weather and all the salt on the roads. 22/01/09 Whiteline Front Anti-roll which i picked up cheap, 2x hubs which i picket up and sprayed and got new bearing put in and 2x Lower ball joints all will be fitted tomorrow night. 24/01/09 Picked this up today TRD LSD

good project mate. Im using a Gt25/30 off a skyline. one thing tho i had forge pistons and standard rods and ran 10psi and my pistons cracked. Its defently worth holding back and getting your engine forged and set up propley. if you want any advice or help with this set up drop me a pm

5/1/09 my new tyres which i ordered

24/12/08 Well after selling the Teins to pay for my insurance. Early Christmas present from my parents to get my car back on the road.

looking good mate. any chance if you have any pics of engine ect of the blue one and pm them to me. remember seeing this go and wanted to see more of it

1) Idrees 2) SiCaln 3) Mikey Jay & Joey 4) Jules-B (Jules) 5) Briggers 6) Chris K 7) Glanza cl Jag 9) Rob Bee*R & Si 10) Bildo 11) SX Turbo 12) Enright 82 (andrew) 13)Ryanerek (ryan) 14)GT_Ben (Ben) 15)MalcolmGT ( i should be free) 16)Starlet3sgte (in the ek9) 17)Glanza87 18)NightSpirit 19)AdDaMan 20)Benep91 21)Jay 22)AlexGTAdv 23)Al 24) abbott

looks good gary think it looks better with them wheels

6/12/08 Convoy details meet at M25 clacket lane services 7:30ish pm in petrol garage leave there about 7:45-8 to go on to bluewater meet please put down names 1) abbott 2) abbott's brother 3) Starlet3SGTE (in the EK9 obviously) 4) GAZ EP85 5) Neal gt

looking good mark. Noticed in the pic that the top rad hose is going to thermostat part of the head spose to go to the front or are you trying some think different?

looking good gary

big thanks enzo got my brothers turbo today. looks the nuts mate cant wait to get it on next year.