Asad

Grab an eraser wheel off ebay ONLY if your 100% its got the original paintwork and keep the wheel moving so heat doesnt build up Did all 5 doors in about 15min and managed to throw some polish down Click

Got mine on y-day really does feel different, good buy! Just a few tips i removed the PS fluid bottle from the bracket (didn`t drain it, it unclips) and took a few other bits off like the dipstick and rotated the other bracket round to make it easy......not sure what its like for the glanza owners with the ABS i also got some 600grit? paper and smoothed the face of BMC down as there are casting marks on it meaning there wasnt full contact with the little round thing (making it kinda pointless really)......do it gently so its smooth enough people dont go crazy i also put that ^ pipe ont

hmmmm looks more at home on top so well see what happens, thanks

Hey, just went out and gave it a quick fitting wheres the best place for this power steering pipe? up or down? seems fiddly but ill have a proper go tomorrow

is the bottom rad hose "cooler" than the top one? for the coolant temp sensor ^ follow the bottom hose to the block its the green coloured one also the thermostat is held on by 2x 10mm nuts its literally takes 5 min to take out and replace.

Any chance you could send the little 8mm screw off the tb my way? pic

Hello, old friend! nice to see you got the filter in the end, whats next on the list? P.s Its because of Denso (japan) our little beasties are sooo reliable.....

Good luck bud, just pm if you need a hand

The hose circled goes to the fuel pressure regulator? leads to roughly the same place on the corolla mani if you look around the area you will see where it goes...if left disconnected engine noise changes. For the MAP hose it MUST be connected (really really poor running if left disconected).....for the time being unbolt it and connect it, any hose of the same diameter will do just go round the scrappys looking at toyotas youll defo find one long enough.

Top lad got mine today, quality item look forward to fitting it tomorrow

Spec wise id say CD doesnt dissapoint i love the CL, sunroof, and leccy windows.... if your stripping it go for a basic basic one which is S

I give up lol ^ anyone rekon my insurance would be cheaper on a N/A with them?

Im 19, 1yr NCB, on my own = £1300 on a N/A

Hey, im heading up to hud on wed morning would it be ok to pick mine up then? if so ill be round yours at 10 ish till then

Whip the TB off and give it dam good clean mate, did it mine the other day made a BIG difference even took the intake mani off and cleaned it and tried to get as much gunk off the head. Replace the dizzy and rotor arm the contacts are usually really worn.....any news on your new igntn leads? which pipe was cracked?

No worries....search continues

you shall have it tomorrow my dear friend, Pm me your number and ill meet you somewhere?

Are your old springs TTE ones? still have the other 3?

Can get you a new KYB one for £35

Not too sure ~£800ish (service + performance parts) dont really care tbh i love driving the thing

Sorted the timing out (10 mark) can still hear slight pinging at WOT in 2nd+....any advice on what else to do? spark plugs are new, done about 500 miles (could the driving around when the pinging was louder cause them to go bad?) new dizzy and arm will be on soon expensive in the long run....but use better fuel such as V or super? it did throw error code 14 i cleaned the dizzy and all of the tb and reset it, fingers crossed it doesn`t come back In light of recent events i`d advise ALL n/a owners to stay away from advancing/retarding the timing. It is an easy "mod" but it can also easily

Got it slightly better today...... could really do with a timing light anyone near manchester have one i can borrow? any advice on which to get off ebay?

I adjusted it slightly......it got worse see if i can get hold of a timing light and set it up properly i dont want to use it but i need the car am i right in thinking retarding = towards the bulkhead adv = toward you? do it with engine on at operating temp? any more tips greatly appreciated friends

Bump..... After reading http://www.ukstarletclub.com/forums/index....ignition+timing going out now to check the plugs let it warm up make a mark and loosen the dizzy and knock it back a tad (towards the car)...take it for a spin

Its on the to check list bud thanks