Socks

Bride Brix Recliner Seat Bride Brix Recliner Seat In Good Condition. Usually seats of this age are in poor condition! Reclining works perfect. only £179.95 Click here to buy now!

I mentioned this a week back... See this thread.. http://www.ukstarletowners.com/topic/89735-rear-passenger-heaterscoolers/?p=1082337

The Plot thickens... This same GT had a much much much bigger starter motor & different/heavier alternator.... Ontop of that, the heater matrix was huge, compared to stock... Stock: Out of this GT: Way Way Way bigger/thicker. To give better heating... My friend adam disagrees this is a winter model due to it not having yellow foglights... However one foglight was new, and one was old. No idea if they were original or not. Not do we know if the radiator was thicker as like i said it had a civic one on it.... Unsure at what point a starlet becomes a "Winter"

EP82/EP91 Seat Top Covers EP82/EP91 Seat Top Covers These are a rare item anyway, but to find them, Brand New, In Original Packaging. Quite Frankly, takes the p**s! Factory Toyota Starlet Seat Covers, cover the backs of the seats to protect and keep them clean. Covers fit both backs of the front seats and the back of the rear bench. Item No. 68 http://www.ukstarletowners.com/page/articles.html/_/jdm-scans/ep91-original-accessories-r28 Will fit Factory EP82/EP91 Seats, Including some aftermarket seats! only £129.95 Click here to buy now!

EP82/EP91 DIN Multibox EP82/EP91 DIN Multibox Optional Extra from the EP91 Options List in Japan Only. Item No. 17 http://www.ukstarletowners.com/page/articles.html/_/jdm-scans/ep91-original-accessories-r28 Will also fit EP82... DIN Fitting, has 2 slide out draws on the right hand side for Cards & Coins. Coin Draw is dark blue velvet lined to stop coins rattling. Card Draw is perfect for credit/debit cards. The large draw on the left is also dark blue velvet lined and can be opened as a storage compartment as well as a draw. Its actually perfect for an iPhone! This i

15" MOMO Racer Wheels Genuine MOMO Racer Alloy Wheels The perfect factory offset for a GT Turbo/Glanza. All the wheels are straight, no buckles. All the wheels have small kerbing and small scuffs on there face. All 4x Wheels have 195/50/15 Tyres on them. 2x 5mm & 2x 2mm of tread. Quantity: 4 Size: 15 x 7 Stud Pattern: 4x100 Offset: ET38 only £179.95 Click here to buy now!

Unknown JDM Deep Dish Steering Wheel Unknown JDM Deep Dish Steering Wheel In used, but good condition. only £34.95 Click here to buy now!

Wiseco Forged Pistons & SCAT Forged Rods Wiseco Forged Pistons & SCAT Forged Rods Removed from a EP82 GT Turbo with a blown forged engine. Pistons are in Good Serviceable Condition. There 74.5mm and have covered 7500miles. Colouring suggests the map was good. Rods are poor condition. 1 is damaged from failure. Remaining 3 look serviceable. Come with ARP Rod Bolts. only £274.95 Click here to buy now!

RX7 Intercooler Conversion RX7 Intercooler Conversion Want more power, but not more Lag from a Front Mounted Intercooler Kit? The RX7 Big Top Mounted Intercooler Core Conversion is the way to go. Much bigger and thicker intercooler core, gives additional power, with no added lag! only £59.95 Click here to buy now!

Custom TD04 Front Exit Exhaust Custom TD04 Front Exit Exhaust Made from high quality stainless steel, will require brackets to mount to the chassis leg. 2.5" Straight Through Exhaust with 3" Slash Cut Tip. Built in Flexi. Has a fitting for lambda/wideband sensor. only £149.95 Click here to buy now!

Harikei Sunko Plug & Play ECU EP91 Glanza V Harikei Sunko Plug & Play ECU Rare Plug & Play ECU, connect it up, turn the key and away you go. No Remapping Required. Fuelling Check Recommended. Raised Rev Limiter to 8000rpm+ Removes 180kph Speed Limiter Removes Over Boost Protection Limiter More Aggressive Fuelling & Timing Capable of 200bhp+ Designed for Stock 4E-FTE Engines & CT9 Based Turbochargers only £449.95 Click here to buy now!

HRF V300 Apexi PowerFC w/Commander & MAF Sensor This extremely rare package is hard to come by complete, usually they pop up for sale as a bare ecu which is pretty pointless! HRF converted a handful of Apexi PowerFC standalone ecus, to be used on the Starlet GT Turbo. They offered this very advanced package for 298,000yen (£1650+). This created the HRF V300 ECU Package. The setup utilizes the use of a superior MAF Sensor Design over the Original MAP Sensor. Allowing much more accurate measurements of the volume of air entering the engine. The MAF Sensor can be used before or aft

We have this in stock: http://www.jdm-ep.co.uk/index.php?main_page=product_info&cPath=175_176&products_id=443 Very rare to come accross one with NO Cracks. They all have cracks... as for shaft play, they ALL have shaft play too, even a new one would.. Your looking for no EXCESSIVE shaft play and not mroe then 1 crack!

Good man. Glad to see your back Paul. Get that SR finished and get your scottish arse to Japfest..

Your going to struggle... Buy a mint pair? http://www.jdm-ep.co.uk/index.php?main_page=product_info&cPath=160&products_id=407 Then you have a spare for 1 side is the best way!

Loving the caps also love the Gi badge in the grill Parking Pole work?

His username on here is rinsep82 i think

Happy to see this being taken cared for. Keep up the quality work mate.

Yes toff. Welcome back mate. You should know by now you can't get away that easily. Interesting engine idea. Looking forward to seeing what happens here

Unsure mate like I said.... Best to just source a JDM rear axle

N/A use drums... JDM Turbos use Discs.... So unsure about compatibility mate!

New Rear Axle...

We have rear callipers in stock http://www.jdm-ep.co.uk/index.php?main_page=index&cPath=122_162

Didnt expect to see mr rwd in a EP82 Good for u Neal, i think you will enjoy your stay here ;)

http://www.jdm-ep.co.uk/index.php?main_page=product_info&cPath=131_154&products_id=640