Marck glanza V

hey im sure i read somewhere that the clutch can handle about 250-300 bhp with the mounts you can get either its just cheaper to replace the bush on its own if you choose this then it will probably need pressed out then the new one pressed in (im not entirely sure on this because i cant remember what the mount looks like) with the lsd it will not work with a standard lsd as it has a different gearbox mount on the rear. it will work with an aftermarket lsd hope this helps marck

im an apprentice mechanic in my 3rd year (working for french crap)

if you just weld a pipe to the decat it will sound like a tractor at idle unless you seal the wastegate flap seperate to the turbine. even then its not that likely to form a tight seal best ways external wastegate. sounds amazing Marck

definately go with the td12 its great links full kit http://www.ukstarletclub.com/forums/index....item&id=137 you would still need a wastegate turbo http://www.ukstarletclub.com/forums/index...._item&id=77 comes with water and oil lines Any other questions just ask Marck

ill post up my results when i get them Marck

TD12 ftw!! im running one at 0.7 jus now but soon will be running 1.2-1.3. even at 0.7 its quite nippy plus you cant beat screamers Marck

ill be on the edinburgh cruise stand

yeh i was parked a few cars along from yours i think. next to the 100s of fiestas??

never actually noticed any gts. its strange that alot of the glanzas that were there dont seem to be on the site

hey people was at edinburgh cruise last night saw quite a few glanzas just wondering if it was people from the site marck

i have the same manifold and what my problem was is the pipe coming down the side for the external wastegate was stopping the decat fitting on marck

on mine i have a 0.7 bar spring. also with that manifold depending on what decat you have it might not fit marck

i had 69 with a prostitute under a cow because it turned me on lol

sounds like it could be fuel cut how long have you had those mods on for

im genuine 10 pestige level 70 got most of the titles and eblems. played that game way too much

you are supposed to use one of these http://cgi.ebay.co.uk/BOV-Turbo-Dump-Valve...=item5887bc479f cant remember what size it is though

im guessing without a silencer it will be very loud marck

yeh theres a yellow 1 up near the grass market.

welcome a few people popping up from edinburgh recently. @russleh - i think theres 2 yellow one including this 1

if i remember right the grey wire should connect to the handbrake light switch marck

add me M-Dougs ps3 got the new maps too

cheers for the help every1

also read up to put shims between the pad and the caliper if the discs arent thick enough do you think this is safe??

i have just had a quick search on the net and 280mm discs will be fine for the calipers so its just the thickness i need to worry about thanks for your help marck

ive just checked and it seems i have both measurements wrong its a 305mm disc with 28mm thickness