T-dog

Yeah 14” was the original size 👍🏼

I forgot it was Sunday . Gutted I missed it 😢 

Sorted now , can be locked . Thanks 

9 hours ago, Socks said:

Whenever you like! Its all sorted now, go here:

https://www.ukstarletowners.com/subscriptions/

All done . Cheers socks 👍🏼

Great news , when can we renewal are memberships ? 😀

All the info is in this thread mate 

http://www.ukstarletowners.com/topic/49562-toyota-celica-st185-caliper-conversion-whats-needed/?tab=comments#comment-640342

I've sealed a few Sumps on these cars now and found that the only sealant that really works is the Toyota black sealant . I tried Halfords stuff and few off the internet. Also is it a genuine seal or aftermarket ? As I had trouble a few years back with cheap crank seals not seating right 

That’s been bent mate . Should be dead straight . So yeah could be casing a issue were it’s kinked 

3 hours ago, BMX-RIG said:

Seems abit far for you to travel doesn’t it? 

Maybe a little bit . Like a good 5 miles 

I’m in for sure 

I've Got a cover if Toyota let you down 

I've got y-cam outdoor cameras installed around my house . Fantastic bits of kit 

Does it fit a starlet handbrake lever ? Thanks 

That colour  love it , going to look mint when done 

Driver side engine mount to body . Top of the Gearbox to passenger side body . I added one to inlet to firewall . You could add loads but up to you lol . 

All sold please lock 

Mounts and hose sold . Just speedo converter left 

Hi mate , it screws on to the gearbox speedo drive and the other end onto the cable so go between on the gearbox side if that makes sense. Yeah I’m sure the c52 and c56 boxes are the same design I think . So would be fine , if intrested pm me . Thanks Toby 

Here for sale are the side engine mounts in Good condition the bushes were fitted less then 500 miles ago . £60 and £5 postage .     Speedo converter , a must to convert from kph to mph makes life so much easier with speed cameras lol . £40 and £2 postage .  Braided brand new hels fuel hoses bought from idworkz bolted it to my fuel rail then changed my mind on the fuel setup ( it’s goes from rail to filter ) . £25 posted . PayPal please and cover fees . Any questions please ask.  Thanks Toby 

3 hours ago, Calum122 said:

There should be a plate that goes over the top of those arms as well pal.

 

 

Yeah got the plates and bolts was purely just to make sure I had the bushes facing the right way to the outside of the car . Thanks 

Hi guys , is this anti lift kit fitted right/ bushes around the right way ?  before I bolt it to the car . Thanks Toby 

https://www.eurocarparts.com/ecp/c/Toyota_Starlet_1.3_1997/p/car-parts/suspension/suspension-and-steering/lowering-spring/?974820171&1&a92b8c3077a5880f9bb36885c97069208ff9788f&000559  Had these on my old starlet and loved them sat lovely and wasn’t to  crashy 

And I would stick from a 5 to 7 “ rim width if you don’t want to do arch work etc 

35 to 40 mm springs make a starlet / glanza sit lovely not to low just right , and a set of 15 or 14 4x100 et35 to et40 would be perfect with that combo