-
Content Count
657 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Everything posted by T-dog
-
Both sold . Thanks
-
Two an8 rocker covers for sale , one red and one white . A fresh painted AN8 Cam Covers in bright red and white they have been vapour degreased in Perchlorethylene to remove dirt and carbon build up and etch primed then painted using high quality durable paint. Β£100 for the red one and Β£80 for the white one ( the white one has a few marks in the paint but still looks good) Β£10 postage.Thanks Toby
-
Yeah I fitted one of the first kits , was a great upgrade and straight fit. Anymore info pm me ππΌ
-
The wires you are after are - BLACK/RED = POWER BROWN/WHITE = GROUND YELLOW/RED = TPS SIGNAL
-
Yeah that looks like the alternator plug and power cable . Itβs will be around there have you anymore plugs ? It could well have been cut off ?
-
Glanza steering wheel airbag resistor value
T-dog replied to Nafeez2125's topic in MOT & Maintenance
Good find . Always good to keep the light working without taking the bulb out etc ππΌ -
Most people these days just blank them off with a made bit of a metal and original gasket and then just loop the coolant hoses . Then just adjust the idle through the screw on top of the throttle body . I have done it on few of these cars now with no change to cold starting . If you donβt wanna do this have you taken it off and given it a good clean etc ? . Hope this helps ππΌ
-
I use red stuff or ds2500 both amazing for fast road and light track use ππΌ
-
Startermotor replacement 4efte facelift glanza
T-dog replied to RoyalDutchie's topic in Drivetrain & Transmission
I have fitted na starter motors before on a couple of glanza no problem . Slightly smaller in ah but still work fine . Also fitted a auto one year back just had to nut and bolt one of the holes . Lots of options if needed mate ππΌ -
Try unplugging the emanage and see if will start up on stock ecu . Worth a try just then one more thing to role out ππΌ
-
Is it on stock ecu or aftermarket ?
-
All earths on the loom put back on the engine ? Like idle control valve earth point , bulkhead near igniter , both earths on the gearbox and mount , other side on the mount to body , both front wing earths. Itβs just a case of back tracking mate if it was running before It must be something simple . What did you take apart to sort the coolant leak ? ππΌ
-
I've had this before on a couple of glanza when people have painted the bay and the igniter is not earth properly on the bulk head . Worth a try mate ππΌ
-
Very interesting work mate, love the head work, keep it up ππΌ
-
Fantastic power from a stock motor . Bet it drives amazing π€©ππΌ
-
-
I've got meisters on mine and are amazing , I got them setup for fast road / light track use and they feel amazing . Will send over the specs I had them dialled into ππΌ
-
Looks a nice clean example ππΌ
-
I was in the same boat as you a few years ago and had a blitz nur but was just so loud . I then got a hKs silent power was a nice exhaust not to loud but had a nice note for daily driving and didnβt piss the neighbours off π . I have now got a fujitsubo power getta and itβs sounds amazing with no drone and just a nice note .Hope that helps you abit ππΌ Toby
-
Have you got a link for the power enterprise belt being after one for ages since swapping my last one out due to being old but kept it on for a bit longer due to looking so sweet lol πππΌ . Keep the build up
-
Radio harness no power - need help
T-dog replied to starlet1991's topic in 4E-FTE Engine Discussions
Or just buy one of them iso loom as in my link above and will be plug and play with a stereo -
Radio harness no power - need help
T-dog replied to starlet1991's topic in 4E-FTE Engine Discussions
^^^ what claymore said that should get you going In the right direction ππΌ