japcarmaniac

ok cheers mate!!!

just want to ask them were they got there bumper lip?

i had a similar problem when i had my prelude and i just got a push to make button from maplin and connected it to the ground wire and the wire that was meant to go to the steering wheel, mounted the button on the dash to the right of the wheel.

i read the thread about the 7AFE and aparently theres some modification to be done to get it to fit.

ok it seems the 2nd gen 4efe TB bore is 45mm and the 1st gen is 50mm. the 4efte is also 50mm so will prob try that route.

cant find anywere thats states the diameter of the 7AFE TB.

from the corolla? ill check that out. is that the throttle body or both mani and TB?

i heard the 4efte throttle body is only 1mm bigger. what corolla manifold are you refering to?

is there a bigger throttle body or another intake manifold that will fit to the 4EFE from another toyota or other?

thanks for the advice people ill take it on board and get the coolant changed and observe it and take the right action if it happens again.

ive only had the car a couple weeks so ive not changed coolant or anything and theres no sign of leaks. ill mabey change it and see it it does it again. cheers!

just checked my coolant and its brown and slightly oily. no signed of head gasket problem though. no overheating, no white residue, no smokey exhaust and car runs perfect. any ideas?

kl kl. just ordered them. thanks

could sombody put a pic up if they have a 40mm drop on 15's just so i can see how it looks before purchasing my springs. thanks!!

sound sound! just bought them. cheers!

i fitted the wheels today but i felt there was somthing wrong with using the standard nuts. by looking at the wheel it seems theres been a different nut used or mabey its wear from the brace. ive put a pic up for you to see. they seem to be on enough thread but usualy wheels have a taper for these nuts to fit snug although these wheels dont. the bottom picture with the fitted nut looks as though its got a lip but its the wear from the old nut i think.

thank fck for that i thot i was going to get a reply that its a serious problem. feel btr that im not the only one lol cheers guys!

yeh thats the ones. cheers! got them for £65 wrapped in legal yokies.thot that was a good deal. ill get them on today.

ive just got my starlet and filled it for the first time today and noticed that the surround around the petrol entry is realy badly corroded! the bit that the cap scres down on. anybody else had this problem? is it common? can it be fixed easly?

as long as you dont do it like this youl be ok lol!

ive got a set of 15" mr2 roadster wheels. do you rekon thel go on the starlet. think the back ones are 1/2 inch wider. offset is 45 though. cheers!

cheers!! ill just go and order them

i was looking at clear indicators for an EP91 Glanza and was wondering if they will also fit the standard n/a EP91?

i might consider that cheers!

im struggling to find a location for component speakers. i dont want to fit parcel shelf mounted ones as i think that looks crap. ive got manual windows so cant real cut the doors. any ideas?