Toby@ToyTuning.com

Nothing like a clean Black Glanza to get the ball rolling, keep us updated on progress. Best Regards, Toby

Hi J, Yes just sent you an PM, must remember to call them PM's rather than u2u's. Thanks, Toby

Yes these are compatible with aircon so that you can leave in place. Personally you should remove for weight gains but some people prefer to have it. These kits are replica's of the Blitz units. There very good quality and we're sure you will be impressed. Best Regards, Toby

As Si mentioned it's impossible to determine what the ECU was mapped for. There are many variables that effect the conditions within the ECU, temperature, pressure, friction, climatic conditions, atmospheric load. Even if you had exactly the same set-up to the car in Japan it will still be different due to the variables mentioned. If you were in Japan it would be a different story as you could have the ECU re-set but we don't have the equipment here in the UK to do that. It's probably worth installing and getting the car rolling roaded just to see the parameters within the box. Cheers T

Is that £135.00 for a recon'd box? As mentioned it would be wise to speak to the garage as they are partially to blame. You can use the box from the G6 Corolla with no problem at all. You could also use a GT/Glanza box (non stock LSD) although the ratios won't be suited to the 4efe. Cheers Toby

Hi Andrew, It's not a nightmare job but it's very messy that's for sure. As Stu pointed out if the CV hasn't worn (i.e the boot has been split for a short while) you should be able to save it by replacing the boots. If you leave it too long then the joint will dry up and need replacing. We sell full Outer CV kits for £65.00 per side which includes outer CV, Boot, Grease and Circlips. If you just need the boots then we also sell these at £10.00 per side which includes boot, grease and clips. Outer and Inner are both available. CV's can be a nightmare if there not resolved quickly. It's always worth while checking the condition of the boots from week to week just to ensure that there are no splits and your not loosing grease. Best Regards, Toby

What can I say, Joz I'll send your payment over this evening Really appreciate the write up ten fold and appreciate the warm welcome many thanks chaps. We do try our best and am glad that we have so many faithful customers. We've been trading now for just under two years and hope to bring many more exciting parts with the release of our new website. It's taking it's time as these things do but we hope to create an even better experience once it's up and running. As many will know we are also importing Toyota Starlets for resale and to order so if you need any help/advise on that front then don't hesitate to get in contact. We pride ourselves on good customer service and impartial advise, we won't try and sell you an item if it's not needed like many other companies. Your satisfaction is are no 1 priority and I personally will do my upmost to continue this trend. Even if you don't want to buy anything we will be more than happy to pass on our experiences and help you on your Starlet quest. Any how many thanks again and we look forward to hearing from you all soon. Best Regards, Toby

Sure thing I did try and send the reply earlier but it stated your inbox was full. Any how we saved the message so will re-send now Thanks, Toby

I wish, could get even more done then.... T

There's three of us now :lol: T

Gun Metal or Anthracite would look good we think T

Now Sold. Many thanks, Toby

Update: 1) Glanza_MK - Top Spoiler - Paid 2) Si_Glanza - Top Spoiler 3) Toymota - Top Spoiler 4) steviet - Top Spoiler Don't hesitate to add your name down if your interested. Thanks, Toby

Update: 1) bex 2) Darius 3) Turboelvis 4) lanxter 5) stevetony01 Many thanks, Toby

Update: 1. Garf (EP82 GT) 2. Bullet (EP91 Glanza) 3. Stu0500 (EP91 Glanza) 4. Pillzy (EP82 GT) 5. Baarsie (EP82 GT) 6. AndyGT (EP82 GT) 7. Squeekyduck (EP91 Glanza) If anyone wants to be included don't hesitate to contact us. Best Regards, Toby

Hi guy's, These were our drag wheels and have fresh rubber for 2007 but we now have the Zep 4 pot kit and they won't go over our brakes any more unfortunately. The alloys are magnesium finished in solid black and are ultra light weight, wrapped in brand new 195/60/14 Yokohama Advan a048r Semi Slicks fresh for this years season. There ideal for the qtr mile as have very tall side walls so that you can reduce the tire pressures to a minimum to allow for a much larger surface area on the tarmac without damaging the rim. The smaller wheel size will allow for greater acceleration whilst not compromising grip due to the tire dimensions. Looking for £285.00 all in. The tires are over £100.00 each so a great bargain for someone. Enlarge Enlarge Enlarge Enlarge Enlarge Enlarge Enlarge Enlarge Get them in time for the qtr mile season! Kind Regards, Toby

Hi guys, All the information regarding this kit can be viewed in our s/hand section: http://www.ukstarletclub.com/forums/index.php?showtopic=5592 Here are some pictures for you: Enlarge Enlarge Enlarge Enlarge Enlarge Any questions don't hesitate to ask. Best Regards, Toby

It does look good, nothing like a nice low stance on the GT. Are those Rota slipstreams or the originals? Best Regards, Toby

Mark has it spot on, those right angled pipes are not ideal that's for certain. Have a look here we've just started a group buy on good quality autobahn kits: http://www.ukstarletclub.com/forums/index.php?showtopic=5769 Best Regards, Toby

.................................................................................................... GROUP BUY .................................................................................................... Autobahn Front Mounted Intercooler Kits for EP82 GT and EP91 Glanza - £299.00 Inc Mainland UK Delivery Please see below for more information regarding the above available item: .................................................................................................... Application: EP82 GT and EP91 Glanza Description: High quality intercooler kits by Autobahn. Very similar to the Blitz LM kit for the half the price. Includes everything needed for complete installation: - Front Mounted Intercooler - Direct Fit Pipe Work - All Silicone Joiners - All Jubilee Clips High quality coolers made from 6061 aluminium and the core is 100% vacuum brazed. The polished aluminium end tanks are hand TIG welded for a perfect fit. The ambient fin pitch has been adjusted to provide an optimal fin density of 15 fins/inch. This gives the intercooler excellent flow properties as well as a large cooling surface area, and the efficient core takes advantage of these properties. The four threaded mounting points along the top and bottom of the intercooler make installation simple. The intercooler core size is a massive 600 x 260 x 70MM and has a pressure drop of only 0.2psi @ 15 psi. The intercooler is polished aluminium with a Bar and Plate design. The pipe work is polished aluminium. ABS and air conditioning do no not need relocated or removed. The quality and fitment of this kit is similar to much more expensive fmic's on the market like Greddy, Blitz and HKS, in most cases this front mount intercooler is larger and more efficient. ~9.2KG in total weight! Features: * Fully polished side tanks * Tabs on bottom and top for easy installation * Improved Bar and Plate to increase performance efficiency * Core size 600mmx260mmx70mm * End to end 780mm * Inlet 75mm (3 inch) O/D * Outlet 75mm (3 inch) O/D * Supports more than 650HP * Latest unique Bar and Plate core design to improve air velocity by 16% over the old design * Fully polished alloy intercooler * Ultra low pressure drop 0.5-1psi at 23psi (Normal Bar and Plate 2.8- 4 psi at 23 psi) * 35 % weight reduction * The kit will not only dress up your engine bay but will also allow for the much better air flow maximizing cooling efficiency on your Starlet. High quality kit for a very reasonable price, please see below for group buy information. .................................................................................................... Payment & Information: This group buy is available for 5 or more TGTT members. We accept paypal (4.1%), bank transfer and cheque which ever is convenient for you. To make payment or if you need any more information then don't hesitate to contact us via U2U or email: toytuning@toytuning.com You won't have to wait for other members to pay before you receive your item. Many thanks, Toby

There both pretty good systems, the nur spec will be louder than the HKS system but not over powering. Depends on many variables as to the sound but there both good systems none the less. Have you considered the 5Zigen Pro Racer A Spec, were doing discounts on these if your interested. Other alternatives would be a custom system from someone like Pete or Wepr. Best Regards, Toby

Thanks for the feedback John glad your happy. There good quality springs so they should do the job nicely. Si I'm just waiting for the call back from Japan, won't be until midnight as there +9hours but we should have some info on your larger package! Thanks again, Toby

1. Turboelvis (TGTT) 2 - Lanxter (TGTT) 3. Darius (TGTT)

.................................................................................................... GROUP BUY .................................................................................................... Toy Tuning EP82 Carbon Fiber Cooling Panels - Group Buy - Toy Tuning EP82 Carbon Fiber Cooling Panels - £59.00 exc delivery UK Delivery £10.00 Please see below for more information regarding the above item available: .................................................................................................... Enlarge Enlarge Enlarge Application: EP82 GT All Models Only Description: After the popularity of our Toy Tuning Alloy Panels we now have them available in Carbon Fiber. There very high quality made from grade A carbon fiber. Direct fitment for the EP82 GT. Cooling Plates are used to channel the flow of air directly to the radiator rather than up and over, improving both the efficiency of the radiator and cooling system. They help to increase performance and prolong engine life as the cooling system has consistently lower temperatures. Both functional and aesthetically pleasing, they improve the look of any engine bay. Here's a picture with our alloy cooling panel installed so you can get a good idea of what they do and where they go: Enlarge .................................................................................................... Payment & Information: This group buy is available for 5 or more TGTT members. All cooling panels will be dispatched as soon as payment is received. We accept paypal (4.1%), bank transfer and cheque which ever is convenient for you. To make payment or if you need any more information then don't hesitate to contact us via U2U or email: toytuning@toytuning.com You won't have to wait for other members to pay before you receive your item. Many thanks, Toby

1) Glanza_MK - Top Spoiler (TGTT) 2) Julal - Top Spolier (TGTT) 3) Si_Glanza - Top Spoiler (TGTT) 4) 5)