Jump to content

jayc-glanza17

Member
  • Content Count

    1858
  • Joined

  • Last visited

Everything posted by jayc-glanza17

  1. done quite a few motors... lakeside all you essex lads will know what i mean, i have made a name for myself.. i currently have a 450bhp evo who comes down to loal meets and always says he wants a play... that because i beat him when he had 380bhp, round brands hatch, then lakeside.lol... word of advice guys, sort handling out first... since installing my cusco lsd, i can do silly speeds thru the bends, then have the power and brakes to really scare so called bigger cars.... you cant beat it when you get asked "what you got in that" and ou reply "a 1.3" ROFL....
  2. ive recently had same symtoms... but fixed it... now check around head area to make sure its not coming from their and dropping down.. distributor o ring is common to fail, giving the symtoms u have.. to check crank oil seal, u got to remve timing covers top and bottom and crank pulley ideally to rule that out.. i did all that then found two drops, so re sealed sump and fixed it..
  3. clutch is fitted guys, so im out saturda evening... anone up for say a second meet later on??
  4. clutch is going on tomorrow.. and then on sat i will be swapping the turbos over, with new tial wastegate..
  5. i should be down the seafront if ive fitted few new bits, but cant cain it as i be on a base map..
  6. zisco all the way dude.. their awesome sounding... just wish it was better up their sat.
  7. yh was me dazza, thats my zisco zorst, got nice jap angle.. just doing few bits to mineso should be out couple weeks..
  8. silver v with black cruise bonnet?? if so, then u followed me dazza, and midnight would have been bout the time i popeed into tescos... just after the police incident... should be out again in couple weeks,
  9. was around lakeside, but police just were everywhere, even checked my car over, and once it came back all insured, was allowed to go, but the attitude of the coppers was bang out of order tho... still look on their face once he was told i was all declared, was PRICELESS..... saw few starlets out..
  10. ive also heard about this exhaust thing too... getting a little silly now tho, and is putting good cars off, so this unfortunately leads to a chavfest.
  11. cheers geezer, sounds about right.. ive basically got 4 weeks to finish mine off, or im going to come bk to it over winter
  12. when u hitting a bar of boost?? then when u hitting full boost?
  13. whats the lag like el man compared to ya td04?? not too bad? or extremly noticeable??
  14. saw it pull in yh dude... there is a red turbo v around locally, wonderd if was that.. mostly spent nite chatting to george catching up at pitsea...
  15. i be td05 and mapped within 5 weeks, so can always post up to let u know.. but tbh a td05 from 3rd gear will be faster at pulling, but below say 50mph, td04 will feel faster as its far better mid range.. if its a drag or show car then go for it, if used on road a lot stick iwth td04 or go garrett ball bearing like a gt28
  16. lurch is his username also he is 6ft 6 and drives a starlet so its a lil nickname.lols... thats if it his him.. ah jake was telling george at pitsea last night ive just built my mates forged gt lump.. and i thought i may need a spares and luckily still got a spare crank and block if ever needed.. on a side note any one see that red glanza down laindon sun night???
  17. short black hair?? sounds like lurch tbh, hes from round that way, just recently bought my spare engine off me...
  18. lol.. 16g will be biggest for me, mines a track car.. still should see 300bhp comfortably...
  19. im on EMU, and paul eggerton will map mine.. i was going to get a turbosmart wastegate and order it with a 1 bar spring.. 1.7bar it probs run it in small doses, not all the time.lol
  20. what wastegate yu running?? i be going td05 next week, but be mapped within 4 weeks, with a zisco inlet and 70mm throttle body.. cannot wait to run it when mapped at 1.5bar or more.lol
  21. its two sheets of carbon fibre filled with 4mm foam core..
  22. maybe busier this sat steve.. as king of the ring is on at arena.. i cant make it as im over at brands hatch for mod live all weekend..
  23. i made my splitter from their universal kit... altho slightly broke in pic below, it is now repaired.. but pic should give you rough idea
×
×
  • Create New...