raffa_mk

just to let you know, you dont have to have the angel eyes wired up if you want... you can wire them up so it comes on when you turn the side lights on or you can have it wired up and have a switch and flick it on/off when you want,

Yes it both hi/lo beam, the main reason I am doing this is for the lighting, I've currently got hi/lo hids in the lights at the mo but as u know it's not safe for on Coming traffic and the beam pattern is scattered, so I am doing this mainly beacause that winter is coming up and that I regular travel to Manchester on snakes road and u need good lighting on that road! In terms of the look it should suit my bonnet as it is extended and overlaps on the lighs a little giving a little aggressive look, plus I will be customising a set of Glanza brows to fit like I did before but better.

replied

a blast from the past, well here's what happend after a year, there were put to one side awaiting for some reflet front headlights so i managed to get a mint pair and paid a little fortune for them since they were rare and now lets the pics do the talking, its only half way there, just need to wire everything on the car and sort alignment out as best as poss, and them re-seal them and get them fitted to the car

haha what a guy, repecto for him doing that, funny vid tho

Nice exhaust system upgrade you got fitted there, what does it sound like at cruise speed and on boost? also love the club decal you got there

WOW such a big update since i posted last time, well i have tried and test the corolla ecu at a breaker's yard and to no avail it was a let down it kept blowing the ecu fuse and the engine management light was not coming on. any way i have done a little reading upon what some of guys have already mentioned and i can change the crystal in the ecu allowing the ecu rev up to 6900 on the limit, so i want to know does the engine have a rev limit control? or is it done through the ecu or some form or electronics? as this is what i need to know.

bump If any one can get in touch with him can you tell him to ring me pls

Am sure it's the same 26-16 pin plug fittings? So should be ok?

Has anyone tried using a Glanza s ecu in a standard n/a?

i currently own a 96reg ep91 4e-fe i am currently on a look out to see if i can get the car running better and more power will a glanza S ecu work on my car? and will i see any gains? as i understand the glanza S has more power output? also will certain corolla ECU's work on my car? ive been hearing corolla 4a-fe and 7a-fe ecu's will work from a certain car reg corolla's? has anyone tried these???

Defo worth the investment, only had them fitted on my car a week ago. Car handling now is so much sweet, let me know what setup u end up doing, how low u go damper settings etc so I can compare them to mine.

^^^ x2 not on the lowest setting and being new to coilovers its harsh even on softest settings, the roads are only going to get worse as for the roads in Sheffield it's sh*te when lowered as there's a million road speed bumps!

Are the Glanza and n/a have same oil filters fittings?

Getting them for my reflet headlights I've got. Not bothered about standard n/a headlights as they are solid n easy replaceable.

I get that when on the motorway or when the exhaust temp is high

Thats the one , Big thumps up now to go to Toyota on Monday to see if they have any left.

I've not really had chance to really test my car out as it's always needs something fixing or always bolting parts to my car, and because I've put the front and rear anti roll bar on at the same time I really wouldn't be able to tell what difference it actually makes, I've done a few handling mods in a short time: Front anti roll bar (whiteline 24mm) Rear fixed anti roll bar (whiteline 24mm) Rear adjustable pan hard rod (whiteline) Front anti lift kit (whiteline) TRD front strut brace Rear bench strut brace C-pillar bar Lower front strut (ordered and will be on the car soon for track day) And the car is sat on meister r's coilovers Your best off asking someone who has been putting them on one by one, there's a few members who has them fitted, think socks might have it fitted to his?

Thanks rob, want these to along with my headlights project that I've been meaning to do ... Just getting the parts so I can kick start it and get them complete by the end of the month.

I've not seen them on eBay for over a year lol! What's the part no and I will pop down n see how much they are

That biker was lucky that he was still alive, maby not for long the way he rides!

as mentioned in the title i am after the clear plastic covers for the headlights on the n/a where can i get them from and how much are the going rate

love the key ring,,, fast delivery will order another 2, one for my house and work keys! ;P

what wheels do you have on your car? as i have an identical looking ones as you but there is no badges or marking i can see on mine as they came off a starlet GT