raffa_mk

I've got front and rear and c-pillar on stock suspension n noticed difference straight away front under brace is good but the bumps here damaged it but it depends what area you what to strengthen. They do work, some more than others.

Any place will do for me, hope weather picks up as it's started to rain here. See every one 2mro

still after a low temp thermostat can anyone point me in the right direction?

just had a quick read of the build, yeah i like the idea of not having to drop the gear to access the power will help, also will this give you more on fuel economy? as thats what i am also thinking, the cost involved changing it over it should save me money in fuel in long term and should pay itself off slowly in the long run? just want to know if anyone has done it to an n/a before? anyone?

i will have a look at your build later on. which page is it on? also what i want to know is how it affects the power band as mine mainly kicks in at 4K revs will this mean i will get better access to the power as i will be accessing it more when i change gears? as when i currently go through the gears 1st 2nd and 3rd peak as i change, the revs will drop to 4K area in the next gear. will this be the same or will it drop more lower than 4K mark say 3700K? or less to about 42500K???

I am looking to get a 6 speed gearbox for the n/a Someone has already got it fitted to there car, What I want to know is the gear ratios and what speed do you get as you go through the gears, also with it being 6 gears I want to know what's revs it drops too on 6th on the motorway and at what speed can you start to drive it at in 6th gear, and has any one used the standard clutch or updated clutch with the 6speed?

Nice add on there with spoiler, what's next? Silver is a pain to paint, even temperature effect the colour and silver ghosts up easily compared to other colour if not done at warm temp.

Like that, alot of effort and time has gone into it, paintwork let it down but credit to the guy

Not got your no, pm it me, thanks raffa

I will be there

Is this the same place for when were meeting for japfest?

Drew--- I am from Sheffield if you want to meet up?

lol! Wish I could, I had complaints from them before, its good that alot of them appreciate what I've done and always ask what's next

Don't know how he did that! But quick reactions tho. Thought it was going to spin and roll. Passenger is like a robot didn't even blink lol

Thanks for comments guys, had to shush the car up and put the bung in as it attracts too much attention and is very loud, sounds more like a honda, always tempted to take the bung out and let it rip. I will do an in car cam recording when I take the bung back out as the neighbours will complain in my area when I am passing by. I've noticed the car runs very smooth now and thats the car doesn't feel restricted and feels more torque has been added. Don't know how much bhp gains I will get but the next step is to increase the 2 runners with a bigger and longer runner before the cat and wrap the front pipes too. I've noticed the exhaust temp is running hotter and that it pops on motorway alot

Sqeeky clean motors... Is every car a starlet in the family then? And how much is the White n green One lowered by?

Looking sheeeet! I got mine angled and love it's look! Angled ftw! Need to do a build for mine n show you the pics angled. Counting the days down to rr day.

heres a quick vid my mate took of my exhaust i had fitted. its curently got a rolla exhuast mani 4-2-1 setup, sports high flow cat with 2.5" cat back with a 4.5" angle back box. will post more vids of it properly when i get time hope u enjoy

yeh man, looks much better same as above ^^^ tyres

10 should be ok

I my self was in this possition and and noticed a few members were stuck on how to get stock of these so here's the run down on how to get them and you can use there site to order other whiteline products, i ordered mine and they cam in like 3 days direct from whiteline, so looks these guys are the middle men. all the details below: Ok so hereâ??s how to get the whiteline bracket needed for the bushes Go to: http://www.balancemotorsport.co.uk then on left column select : Suspension: Then under suspension click on : Top mounts and alignment This loads the next page then select whiteline The part you need is ks6 (Universal s/bar saddle kit) From the dropdown list select: KS6 Universal s/bar saddle kit â?? KS6_WL -£6.73 This is the link form white line website just so you can see: http://www.whiteline.com.au/product_detail...part_number=KS6 So the total price delivered is £17.52 Hope this helps Raffa

F*ck me that's mashed! Glad you came out Safe from that! Hate people who don't pay attention to there surroundings.

that manifold i want all day every day, thats one piece of kit that you dont see many off, I have my new cat back heat wrapped and sounds awesome, i didnt heat wrap it as its pain in arse...so looking forward to seeing your motor

RARB FTW Looking nice and clean, those front wing look awesome on your car with them wheels.

come on down lad whats stopping ya?