SydesGT Posted March 28, 2016 Share Posted March 28, 2016 Hi guys, Which throttle position switches fit our throttle bodies but is variable rather than idle and wide open throttle? Thanks Quote Link to post Share on other sites
akyakapotter Posted March 28, 2016 Share Posted March 28, 2016 I've head of people retro fitting skyline ones not sure what one or how to fit it though. Or an auto starlet one Quote Link to post Share on other sites
SydesGT Posted March 28, 2016 Author Share Posted March 28, 2016 Auto starlet one straight swap? Quote Link to post Share on other sites
JamesD89 Posted March 28, 2016 Share Posted March 28, 2016 (edited) Auto starlet one straight swap?Wiring needs sorting as the auto is 4 wire and manual is 3 iirc, the tb and tps unit is a bolt on though. Edited April 3, 2016 by JamesD89 Quote Link to post Share on other sites
Phil Posted March 28, 2016 Share Posted March 28, 2016 Skyline gtr denso sensor fits straight on but you just need to tap two holes for the bolts to hold it in place Unbelievably the two holes are already supplied drilled on the stock throttle body to make it extra easyPhil Quote Link to post Share on other sites
Phil Posted March 28, 2016 Share Posted March 28, 2016 https://www.ebay.co.uk/ulk/itm/190993827871 ^ that sensor Which then looks like this when fitted to the stock throttle bodyPhil Quote Link to post Share on other sites
SydesGT Posted March 29, 2016 Author Share Posted March 29, 2016 Awesome, ill get one of those. Thanks guys Quote Link to post Share on other sites
gorganl2000 Posted March 30, 2016 Share Posted March 30, 2016 (edited) https://www.ebay.co.uk/ulk/itm/190993827871^ that sensorWhich then looks like this when fitted to the stock throttle bodyPhil are they two plugs/connections phil?...does one fit the starlet connector? Edited March 30, 2016 by gorganl2000 Quote Link to post Share on other sites
Phil Posted March 30, 2016 Share Posted March 30, 2016 You can just Unpin and stick the pins into the stock connector Or nip the connectors of and solder them up.Phil Quote Link to post Share on other sites
gorganl2000 Posted March 31, 2016 Share Posted March 31, 2016 You can just Unpin and stick the pins into the stock connectorOr nip the connectors of and solder them up.Phil thanks phil Quote Link to post Share on other sites
rob_bower Posted March 31, 2016 Share Posted March 31, 2016 I've heard of people using ones from a Subaru Legacy to. Quote Link to post Share on other sites
olidaviesuk Posted April 10, 2016 Share Posted April 10, 2016 R32 GTR one goes straight on Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.