T-dog Posted August 29, 2016 Share Posted August 29, 2016 Today I took the car for a drive , only to find when I opened up my engine bay it was covered in oil . It looked like it was coming from the rocker cover breather , so I cleaned the bay up of oil and tried a new pcv valve and rocker cover and clean all pipes to see if It had a blockage ect . Then took it out again to see if any better , but as soon as it hit boost it like a bloody fountain coming out the breather . Any one else ever had this problem , I've put it down to ring lands / blow by , but would like to see what other think it is cheers in advance 👍🏼Toby Quote Link to post Share on other sites
T-dog Posted August 29, 2016 Author Share Posted August 29, 2016 It's also a low mileage 4efte fresh import , running 0.8 bar of boost , with minimal mods Quote Link to post Share on other sites
patman Posted August 29, 2016 Share Posted August 29, 2016 How minimal mate just to bump this up Quote Link to post Share on other sites
T-dog Posted August 29, 2016 Author Share Posted August 29, 2016 Blitz p&p ecu , wepr mani and decat with hks actuator 0.8 bar , with a relocation air filter . Apart from that everything is standard Quote Link to post Share on other sites
Flynn Posted August 29, 2016 Share Posted August 29, 2016 Decat, Hks actuator and mani. With the car sitting after a 2 min journey on boost, Toby gave the car a Rev and the oil comes surging up through the filter as the pressure builds. Snap forgot the ecu Quote Link to post Share on other sites
T-dog Posted August 29, 2016 Author Share Posted August 29, 2016 ^^^ cheers joe 😘 Quote Link to post Share on other sites
MR-2 Posted August 29, 2016 Share Posted August 29, 2016 Knock knock, pistons are dead from intake valve side, few times have driven with oily windscreen, when I was young kid :/ Quote Link to post Share on other sites
Flynn Posted August 29, 2016 Share Posted August 29, 2016 Wah 😭 Quote Link to post Share on other sites
T-dog Posted August 30, 2016 Author Share Posted August 30, 2016 Will have to forge it over the winter joe lol ^^ Quote Link to post Share on other sites
Flynn Posted August 30, 2016 Share Posted August 30, 2016 That's the spirit mate! Quote Link to post Share on other sites
T-dog Posted August 30, 2016 Author Share Posted August 30, 2016 Bump , Any one ever had this before or know more info about this issue Quote Link to post Share on other sites
fiddlersport Posted August 31, 2016 Share Posted August 31, 2016 http://www.ukstarletowners.com/topic/38276-does-my-engine-have-blowbyhow-can-i-tell-here-is-the-answer/#entry1184031 Quote Link to post Share on other sites
5e colin Posted August 31, 2016 Share Posted August 31, 2016 ringland OR its just an old engine flokked of aS A FRESH YOKE HA HA Quote Link to post Share on other sites
starletezy Posted August 31, 2016 Share Posted August 31, 2016 Piston rings Quote Link to post Share on other sites
T-dog Posted August 31, 2016 Author Share Posted August 31, 2016 (edited) Cheers guys , yeah I did think as much 😢 Lol , winter build it is Edited August 31, 2016 by T-dog Quote Link to post Share on other sites
starletezy Posted August 31, 2016 Share Posted August 31, 2016 Good excuse to go forge lol Quote Link to post Share on other sites
T-dog Posted August 31, 2016 Author Share Posted August 31, 2016 Indeed mate 👍🏼 ^^^ Quote Link to post Share on other sites
mark1991 Posted September 1, 2016 Share Posted September 1, 2016 I had this too As above its the rings Good luck lad Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.