SpikeyJp_68 Posted November 22, 2016 Posted November 22, 2016 Are these different ? And if they are, will I have to change to glanza driveshafts with roughly 2-220 bhp ? Thanks in advance Quote
daniel_g Posted November 22, 2016 Posted November 22, 2016 N/a shafts are a bit thinner, should cope fine with 200 odd bhp. Just give them a check over make sure they're in good nick. Quote
SpikeyJp_68 Posted November 22, 2016 Author Posted November 22, 2016 N/a shafts are a bit thinner, should cope fine with 200 odd bhp. Just give them a check over make sure they're in good nick.Cheers pal is it just the teeth on them that'll need checking ? Quote
daniel_g Posted November 22, 2016 Posted November 22, 2016 Check CVs for play and rubber balancers too. Its failry rare to actually snap a shaft on a starlet but its been done. Quote
SpikeyJp_68 Posted November 23, 2016 Author Posted November 23, 2016 Check CVs for play and rubber balancers too. Its failry rare to actually snap a shaft on a starlet but its been done.Top man Quote
epcashin Posted November 23, 2016 Posted November 23, 2016 starlet shafts good for over 450 bhp Quote
EP70-PT Posted November 24, 2016 Posted November 24, 2016 refurb them, brand new cv's etc ;) you using the N/A gearbox too? Quote
SpikeyJp_68 Posted December 5, 2016 Author Posted December 5, 2016 refurb them, brand new cv's etc ;) you using the N/A gearbox too?Cv joints themselves are 800 Euro a piece from Toyota. Just had new cv boots put on so they're good to go really. I will be for the time being with an FTE flywheel and clutch Quote
epcashin Posted December 5, 2016 Posted December 5, 2016 Cv joints themselves are 800 Euro a piece from Toyota. Just had new cv boots put on so they're good to go really.I will be for the time being with an FTE flywheel and clutch800 for cv joints ? haha Quote
SpikeyJp_68 Posted December 5, 2016 Author Posted December 5, 2016 800 for cv joints ? hahaThat's what Toyota told me anyway. Said they had to get them from Japan even still it's a bit ridiculous. Quote
epcashin Posted December 6, 2016 Posted December 6, 2016 That's what Toyota told me anyway. Said they had to get them from Japan even still it's a bit ridiculous. that's bullshit anyway haha id workz do Toyota ones I think Quote
SpikeyJp_68 Posted December 7, 2016 Author Posted December 7, 2016 that's bullshit anyway haha id workz do Toyota ones I thinkYeah I thought it was a case of it being too much hassle for them to get them. Unless they priced me a whole driveshaft Quote
gorganl2000 Posted December 7, 2016 Posted December 7, 2016 @ SpikeyJp---this is normally the complete drive shaft and cv joint assembly and is very expensive to reflect that Quote
SpikeyJp_68 Posted December 8, 2016 Author Posted December 8, 2016 @ SpikeyJp---this is normally the complete drive shaft and cv joint assembly and is very expensive to reflect thatI thought that must be the case Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.