Nilz90 Posted July 18, 2019 Share Posted July 18, 2019 Hello, I’m going to attempt to fit my bc coilovers on my gt and was wondering how should it be set up. Should it be same height around the whole car? So should the back and front have the same measurement of the thread? much help appreciated. Thanks Quote Link to post Share on other sites
maerijn Posted July 19, 2019 Share Posted July 19, 2019 (edited) best way is to fit them and then measure from the center of your wheel hub to the arch, dont measure the thread on the coilover are you going from stock suspension to lowered? you will probably need an adjustable panhard rod aswell Edited July 19, 2019 by maerijn Quote Link to post Share on other sites
Nilz90 Posted July 19, 2019 Author Share Posted July 19, 2019 1 hour ago, maerijn said: best way is to fit them and then measure from the center of your wheel hub to the arch, dont measure the thread on the coilover are you going from stock suspension to lowered? you will probably need an adjustable panhard rod aswell Ok I’ll do that then. Should the front and back sit the same height from wheel hub to arch or should the front sit slightly lower then the back. I’m going from dd coilovers to bc and luckily I have a adjustable panhard rod installed. Quote Link to post Share on other sites
Nilz90 Posted July 27, 2019 Author Share Posted July 27, 2019 Question if anyones had the same issue..I’ve adjusted the coilovers the same length on each side when measuring but the passenger side of the car sits slightly lower then the drivers side? Quote Link to post Share on other sites
jellybaby Posted August 15, 2019 Share Posted August 15, 2019 Check tyre pressures and that also was the car on a flat surface Quote Link to post Share on other sites
Ryan.Truesdale Posted August 16, 2019 Share Posted August 16, 2019 Heavy gearbox on that side Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.