Jump to content
Sign in to follow this  
batbo

Zisco Ram Horn Manifold - Block Brace

Recommended Posts

Hi folks, I've recently fitted an internally gated stainless Zisco CT9 manifold to my Glanza. The manifold fitted the block fine and attached to the turbo ok (although the studs were a different thread to the oem items where it connects to the turbo side), but I'm having issues when fitting the standard cat (for MOT) and decat which are both braced,  where the two holes wont line up with the oem brace bracket on the block.

Has anyone had this issue with aftermarket and specifically Zisco manifolds causing downpipe braces to be out of alignment?

I have loosened the bracket from the block and the cat from the turbo, and with everything loose I can get all holes lined up and the bolts / nuts in and on - the only issue is then tightening that up will be stressing something as I'm forcing it to fit - my fear is that this could potentially be worse for the manifold than if it wasn't braced at all?

Thanks,

Kev.

Share this post


Link to post
Share on other sites

Yeah most likely the best way or some sort of pup piece to alter the brackets slightly.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...