Rotating the oil relocation.

[lukEp]

So I've been messing around and done this. Has anyone done it and successfully? 

I can't see it not working and makes it clearer for the compressor side to fit a decent filter. 

 

[lukEp]

Turbo in position. 

[lukEp]

Total access

[Sam44]

What manifold and turbo is this?. The turbo is angled out more on my zisco manifold. I can't see anything wrong in doing this. There's just the port on the rear of the relocation housing to be mindful of. 

[lukEp]

Wepr it's a power up kit I think. Its TF035 the port is still in the same area. It's only moved by 30-35°

Edited April 28, 2020 by lukEp

[T-dog]

What you doing with the 3 location bolts , just sealed them up ? 

[lukEp]

I've not used the 3 bolts for 5years and it's never leaked. It's a 5e so unless I drill and tap the block they don't have the 3 bolt holes anyway

Edited April 28, 2020 by lukEp

[T-dog]

Ok mate that’s good to know for the future 👍🏼

[gorganl2000]

19 hours ago, lukEp said:

I've not used the 3 bolts for 5years and it's never leaked. It's a 5e so unless I drill and tap the block they don't have the 3 bolt holes anyway

i've done the same on the 5Es since 2007/2008...never had a leak as well

i'm not sure with regards to how things will work with the new angle/location you propose  

Edited April 29, 2020 by gorganl2000