Galliano Posted January 24, 2009 Share Posted January 24, 2009 Well.. as you can see, the name has stuck at Ladybird even though its lost the black wheels (spots). But heres what she looks like now, since I bought the Corolla wheels back.We moved it today and as my mum was turning it around i thought it was incredibly low.But i need to sand my front bumper down now as my filler is still poking out where i filled the small gaps from removing the grille. Another problem has now come to surface - i need to re-fit my arch lining, it rubs on full lock on 15s But i have been working on something different... so you'l have to spot it first Also done a few other bits but nothing big yet Enough of the chat, il update again tomorrow. *if you dont mind mods, can I keep this as a seperate thread - my previous one doesnt load for me * Quote Link to post Share on other sites
Glanza_cl Posted January 24, 2009 Share Posted January 24, 2009 Ladybird? oh you mean bob the red blob well that's what i will call it because i liked it lolwheels look nice buddy, perhaps a photo of them in day light? Quote Link to post Share on other sites
Galliano Posted January 24, 2009 Author Share Posted January 24, 2009 Your wish is my command Chris - old pictures (before i owned the car)Oh and heres a little taster of what lightens my cabbin (im sure ive shown you before though) Quote Link to post Share on other sites
Mikey Jay Posted January 24, 2009 Share Posted January 24, 2009 Ah, carbon buttonsUnusual, but liking them. Nice touch Quote Link to post Share on other sites
Glanza_cl Posted January 24, 2009 Share Posted January 24, 2009 looking good Quote Link to post Share on other sites
Galliano Posted January 24, 2009 Author Share Posted January 24, 2009 Thanks Mikey, i have done the one on the other side too Will get pictures of it in daylight tomorrow, and generally tidy her up Quote Link to post Share on other sites
Glanza-Love Posted January 24, 2009 Share Posted January 24, 2009 smart job on the buttons dude!! Quote Link to post Share on other sites
John Posted February 5, 2009 Share Posted February 5, 2009 Is this wivy's old one , the engine still fooked on it? Quote Link to post Share on other sites
Dan507's E-Missus Posted February 5, 2009 Share Posted February 5, 2009 very nice :D Quote Link to post Share on other sites
Galliano Posted February 5, 2009 Author Share Posted February 5, 2009 Engine runs pretty sweet at the moment, whenever i put the battery in it starts first time.Thanks Meggy Quote Link to post Share on other sites
Dan507's E-Missus Posted February 5, 2009 Share Posted February 5, 2009 No Problem :D was a well deserved comment imo Quote Link to post Share on other sites
Galliano Posted February 5, 2009 Author Share Posted February 5, 2009 You havent seen the dents, matte red bumper, scratches, buckled wing and cracked windscreen yet Meggy Quote Link to post Share on other sites
Dan507's E-Missus Posted February 5, 2009 Share Posted February 5, 2009 ^ ohh right.. pics then ? lett me ava look x Quote Link to post Share on other sites
Galliano Posted February 5, 2009 Author Share Posted February 5, 2009 Heres my original topic, with the progress.. but my laptop (even now) doesnt want to let me reply in that topic Hence the new topic with a summary lolhttp://www.ukstarletclub.com/forums/index.php?showtopic=8587 Quote Link to post Share on other sites
Dan507's E-Missus Posted February 5, 2009 Share Posted February 5, 2009 Heres my original topic, with the progress.. but my laptop (even now) doesnt want to let me reply in that topic Hence the new topic with a summary lolhttp://www.ukstarletclub.com/forums/index.php?showtopic=8587shall look now x Quote Link to post Share on other sites
Galliano Posted February 10, 2009 Author Share Posted February 10, 2009 Need some help in prioritising things now Heres my plans, as i have been visualising in exams over the last few days.Please order them in the way you would order them - priorities1. Repair back panels (try the mallet and wooden block before filler)2. De-egg indicators.3. Fit the lowering springs (with a little help from a mechanic)4. Rub down and spray the front panel of the engine bay.5. Weld exhaust and buy new bolt on tip (not going to fit that exhaust I bought)6. Respray interior parts (same gunmetal, just clean up)7. Make a false floor for the boot - with lift hatch for spare wheel.8. New windscreen (not so much of a priority - just needs to be done before it falls through )9. Source new front drivers wing.10. Colour code wing mirrors.11. Respray back panel, rear bumper, new front wing, front bumper and colour code bumper cups.12. Source another Laguna splitter ("D'oh" for selling my last one )13. General overhaul cleaning of the car14. Respray cam cover and strut brace.Things needed for the MOT are..1. New front brake pads2. New windscreen3. Repair of the rear panels (otherwise they could be creased )4. New clutch (well. i think)5. Exhaust Repair.Now.. can anyone help with prioritising? Quote Link to post Share on other sites
Nanglebadger Posted February 11, 2009 Share Posted February 11, 2009 yes i can....GET ON AND DO THEM ALL DAMMIT SAM! get the general tidy up bits sorted first, cleaning the egg off etc etc, get some of the interior and engine detailing sorted while u await a suitable time to start the major jobs like dents and matt paint!GET ON WITH IT YOUNG MAN!Phil. Quote Link to post Share on other sites
Dan507's E-Missus Posted February 11, 2009 Share Posted February 11, 2009 looked at the other thread,, damage isnt that bad lol cars still lush Quote Link to post Share on other sites
Galliano Posted February 12, 2009 Author Share Posted February 12, 2009 Cheers Phil.Turns out my mums friends son in law owns a bodyshop locally, so I might be able to use his resources and help to get my panels sorted out. Then after that I would think he would have a spray booth - for me to be able to try out spraying said panels Otherwise, if I can't find a job at this place.. il be applying to go and work at my mums work - Homebase Quote Link to post Share on other sites
Galliano Posted February 14, 2009 Author Share Posted February 14, 2009 Well.. i bit the bullet and gave it a shot at filling my back panel... Only managed to finish the top half though.Before, with the dent..With a bit of fillerSanding top halfMasking UpPrimeredTheres some parts of it i need to rub down and straighten out etc.. but so far so good in my opinion Quote Link to post Share on other sites
Craig_N Posted February 14, 2009 Share Posted February 14, 2009 Nice work mate starting to look alot better.Craig Quote Link to post Share on other sites
Galliano Posted February 14, 2009 Author Share Posted February 14, 2009 Cheers Craig Plan to sort this out seeings as ive got a week off of school now.. should be done by friday methinks Quote Link to post Share on other sites
Craig_N Posted February 14, 2009 Share Posted February 14, 2009 Cool dont forget to post pics up with it finished lol. Quote Link to post Share on other sites
Galliano Posted February 14, 2009 Author Share Posted February 14, 2009 I shant.. both sides have bits needing to be sorted... both sides can be done within this week and primered...Just paint will need to wait untill a later date unfortunately. Quote Link to post Share on other sites
STEVO9000 Posted February 14, 2009 Share Posted February 14, 2009 You need to key back the surrounding paint to bare metal first mate, would've been better if you did that with the filler area too, but you should be ok.Filler work is time consuming and hard, I've just finished doing my quarter, its no where near perfect, but looks a lot better than it is, but I'm changing cars toward the end of the year hopefully so I wont worry about getting it redone perfectly lol Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.