McGlinchey Posted October 4, 2011 Share Posted October 4, 2011 (edited) Everythig copied from jon44w.comHave this car 2 years now,was'nt going to spend alot on it,just really to sell on.. Tried to sell it a few times and it had a good lot of interest, nearly a px for a ek9 but anyway decided on keeping it and going 5e....Heres some pics of when i got it....drove it like that for a wile, i also fitted a exedy clutch and a hks actuator, got fcked driving it that hight so i got these and it got lowered.... Then i cut the grill out of the bumper to allow more air to the fmic,and smoothed my splitter....After that i raised the bonnet,got my fogs done yellow, fitted a headlight that i got made and got my plate on....I then started collecting some parts for the buildinlet manifoldHKS F-Con VproTorque damperGreddy E-01 boost controller5E Super Clutch and flywheelHeres the spec at the minute:JE 5E 74.5mm Forged pistonsMomentum 5E RodsSTD 5E Crank (Polished)ACL Raceline bearingsARP Head boltsSteel Head GasketPolished Ported HeadPort Machined inlet ManifoldChemically stripped blockBored,Decked,Honed and facedNew toyota oil pumpNew gaskets and stem seals**Parts update**got a kmh-mph convertor,fitted nowTuning developments oil catch canAir-con removal belt, Earthing kit, Clear cam coverPolished cooling panel** Update on spec **JE forged 5 E 74.5mm pistonsMomentum 5 E RodsStd 5E Crank (polished)ACL bearingsARP head studsSteel Head GasketPolished and ported head hand lapped and finished valvesChemically stripped blockBored decked honed and facedNew oil pump (hi flow)New gaskets and stem sealsModified 4E sump and pick upNew 5E timing belt kit and tensionerVernier cam pulleyClear cam coverCustom billet fuel rail560cc injectorsPnP inlet manifoldBig Throttle bodyI also received my new intercooler (3" piping) , I'm also getting my standard inlet manifold honed and polished and the end flange changed so I can run a 63mm Evo throttle body and iac valve, so my old intercooler and pec inlet Mani are up for sale... ** More parts**My new 3" intercooler Adjustable cam pulleySparco wheelMy engine is now ready to be dropped in so should few pics of that and some of the car as she sits now....Well bit of a update , eventually got the engine out this morning..... Was handy enough and managed it my self, 5e engine is ready to be set in now although I'd like to tidy the bay up first.... Anyway here's a few picssome pics of the engine and more parts added....wee bro helping with the turbonew vs old Edited February 6, 2013 by McGlinchey Quote Link to post Share on other sites
yaristurbo Posted October 4, 2011 Share Posted October 4, 2011 good progress pal, what turbo and TB is that Quote Link to post Share on other sites
McGlinchey Posted October 4, 2011 Author Share Posted October 4, 2011 turbo is gt3076 and tb is is of a gt4/mr2 Quote Link to post Share on other sites
Dan507 Posted October 4, 2011 Share Posted October 4, 2011 Looks awesome bud! Red EPs RULE Quote Link to post Share on other sites
yaristurbo Posted October 4, 2011 Share Posted October 4, 2011 thought it was i had that idea to arent they near 2", andy at MM got me on a gt30 too Quote Link to post Share on other sites
joel_ep91 Posted October 4, 2011 Share Posted October 4, 2011 welcome to the club think i seen this once in lisburn as dan says red is obviously the best colour in an ep.there is a N.I meet on the 15th this months in bangor on tgtt.if your free come on down dont even need to be in the ep more of a meet greet sorta thing.http://www.toyotagtturbo.com/forums/showth...?91268-N.I-meet Quote Link to post Share on other sites
McGlinchey Posted October 4, 2011 Author Share Posted October 4, 2011 thanks, na was never up around lisburn in this... and for the meet thanks for the invite, but i work away and wont be home that weekend, sorry Quote Link to post Share on other sites
Idrees Posted October 4, 2011 Share Posted October 4, 2011 Awesome build up, looks like you've got some top quality products waiting to be fitted to this! Quote Link to post Share on other sites
Mo3 Posted October 5, 2011 Share Posted October 5, 2011 Looks awesome bud! Red EPs RULE+1looks like your doing my dream build ! just not a td04l defiantly need to get tint nowgoodwork mate Quote Link to post Share on other sites
McGlinchey Posted October 5, 2011 Author Share Posted October 5, 2011 thats for all the comments.... Quote Link to post Share on other sites
jayep91 Posted October 5, 2011 Share Posted October 5, 2011 nice work dude can i ask what clutch your running and where you got it from? Quote Link to post Share on other sites
McGlinchey Posted October 5, 2011 Author Share Posted October 5, 2011 super clutch... its a twinplate paddle Quote Link to post Share on other sites
jayep91 Posted October 5, 2011 Share Posted October 5, 2011 nice that must of set you back a few pennies lol Quote Link to post Share on other sites
McGlinchey Posted October 5, 2011 Author Share Posted October 5, 2011 it was especially made for me , so i it was a tad exspensive but what the hell lol Quote Link to post Share on other sites
Liam_D Posted October 5, 2011 Share Posted October 5, 2011 Awesome car mate! Quote Link to post Share on other sites
McGlinchey Posted December 19, 2011 Author Share Posted December 19, 2011 some more parts added, should get a good bit of work done to this over christmas, never really had the time this past few months due to my 24v sierra project.. anyway heres some picscj performance lightweight pulleyszicso front strut bracedecided against using my gt3076 as we thought the lag would be too much, so seen this kit and had to get it. zisco gt2876 hybrid turbo kit ;)Bride low max reclineraswell as these few things ive got a simota oil cap, hks rad cap, msd ignition blaster, cusco panhard rod and just ordered my 3" exhaust..thanks Paul Quote Link to post Share on other sites
Ryan5793 Posted December 19, 2011 Share Posted December 19, 2011 jealous! i bought a new set off tein flex and they don't sit that low! lol some awesome parts there though! should be a good build ;) Quote Link to post Share on other sites
jayep91 Posted December 19, 2011 Share Posted December 19, 2011 that seat looks sweet mate fair play will be good to see how the turbo kit performs Quote Link to post Share on other sites
McGlinchey Posted December 19, 2011 Author Share Posted December 19, 2011 jealous! i bought a new set off tein flex and they don't sit that low! lol some awesome parts there though! should be a good build cheers yea they were a few months old when i got them, they were down full at the back but have raised it a little since..that seat looks sweet mate fair play will be good to see how the turbo kit performsyea im hoping for mid 300's. zisco have told me the turbo is capable of 500bhp but we shall see ;) Quote Link to post Share on other sites
sam2kk8 Posted December 19, 2011 Share Posted December 19, 2011 Mate this thread is absoloutley SEXUAL!Everything looks amazingGood job ;) Quote Link to post Share on other sites
McGlinchey Posted December 19, 2011 Author Share Posted December 19, 2011 Mate this thread is absoloutley SEXUAL!Everything looks amazingGood job ;)cheers fella Quote Link to post Share on other sites
lew777 Posted December 20, 2011 Share Posted December 20, 2011 whats the seat like for a fake? Quote Link to post Share on other sites
micky boy Posted December 20, 2011 Share Posted December 20, 2011 Turbo kit looks mint ;) awsome build mate looking forward to seeing what you do with here Quote Link to post Share on other sites
McGlinchey Posted December 21, 2011 Author Share Posted December 21, 2011 whats the seat like for a fake?yea its sound.. considered buying real ones but few hundred more bought the manifold and turbo setup, i know there fake but there still alot nicer than crappy old standard seats lol Quote Link to post Share on other sites
Idrees Posted December 21, 2011 Share Posted December 21, 2011 Awesome collection of parts there mate Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.