Jump to content

is this going to be end project?


Recommended Posts

right seen lews thread of compression results i thought i would take my oil cap off and see what happens, well let it get to temp,took the oil cap off and it spits oil every were and puffs air out of the hole also making a low whistle kinda sound? now surley this is not normal?????

it does not smoke out of the exhaust or oil cap or make any noises etc

what you think??

Link to post
Share on other sites

Is the rocker cover pressurised? You should try it again but take it off before you start the car. Only reason i say that is because you can't remove the rad cap when the engine is up to temp but you can remove it before hand and get it up to temp (usually to clear any air in the rad). Oil cap could be the same?

Link to post
Share on other sites

its usually really bad when your rings are gone or piston ringland. i had mine off for about 1 second when mine was gone and it covered the wing and my tshirt in oil spatters. compared to having next to nothing on my hand when i rebuilt it and done the same. its the excess blowby. id do a comp test tho

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...