scoobykilla Posted April 11, 2012 Share Posted April 11, 2012 Hi folks hope this is the right section, anyway away to purchase one of the above very soon and while sitting at work this morning couldnt think on how it is mounted.I know it comes with a number of small brackets and one is attached to the top mount but where does the other end go?Pictures would b good as i am at work and cant look under the bonnetCheers in advance Quote Link to post Share on other sites
rob_bower Posted April 11, 2012 Share Posted April 11, 2012 the other end bolts on to the engine mount.hth Quote Link to post Share on other sites
scoobykilla Posted April 11, 2012 Author Share Posted April 11, 2012 Cheers RobTake it its a 10 minute job to fix? Quote Link to post Share on other sites
rob_bower Posted April 11, 2012 Share Posted April 11, 2012 ive not personaly fitted one cant see it taking to long though. Quote Link to post Share on other sites
scoobykilla Posted April 11, 2012 Author Share Posted April 11, 2012 Awryt lol cool cool Quote Link to post Share on other sites
Glanza Mac Posted April 11, 2012 Share Posted April 11, 2012 agree'd, straight forward to fit as ive looked into buying one myself Quote Link to post Share on other sites
Chris Green Posted April 11, 2012 Share Posted April 11, 2012 I've got one of these but its not fitted yet. Heres a few photos of it mocked up.hope this helps.Chris Quote Link to post Share on other sites
Socks Posted April 11, 2012 Share Posted April 11, 2012 ro55ifumi has one fitted, PM him matey! Quote Link to post Share on other sites
ryan lang Posted April 11, 2012 Share Posted April 11, 2012 would that actually make a noticable difference bolted so close to the mount like that? Quote Link to post Share on other sites
ro55ifumi Posted April 11, 2012 Share Posted April 11, 2012 Mines a JD Tuning Damper but fits similarJohn Quote Link to post Share on other sites
SiCaln Posted April 11, 2012 Share Posted April 11, 2012 Why not buy my Section one, the one the other's copied?!http://www.ukstarletclub.com/forums/index.php?showtopic=51910&st=0&p=668801&#entry668801 Quote Link to post Share on other sites
jezza Posted April 11, 2012 Share Posted April 11, 2012 I'd prefer to say improved rather than copied. Quote Link to post Share on other sites
SiCaln Posted April 11, 2012 Share Posted April 11, 2012 ok mate sorry, but how improved? Quote Link to post Share on other sites
jezza Posted April 11, 2012 Share Posted April 11, 2012 I tried to improve the stiffness of the strut top bracket by closing the end and welding along 2 flanges. Also increased clearance from the abs pipes/ brake pipes running among the strut tower. Quote Link to post Share on other sites
scoobykilla Posted April 12, 2012 Author Share Posted April 12, 2012 Jezza how much would i be for one of your damper kits ? Quote Link to post Share on other sites
Idrees Posted April 14, 2012 Share Posted April 14, 2012 I would recommend you to read this thread below before ordering from Tegiwa:http://www.civiclife.net/board/topic/122256-tegiwa-imports/page__fromsearch__1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.