Ryan5793 Posted July 28, 2012 Share Posted July 28, 2012 Do the glanza front wishbones, suspension, hubs ect fit a uk sr? I'm guessing they will? Basically I wanna drop everything from my glanza onto the sr so I can get it all refurbed and ready for the turbo conversion at a later date. Any help would be much appreciated. Ta Quote Link to post Share on other sites
micky boy Posted July 28, 2012 Share Posted July 28, 2012 (edited) Yep they are the same mate think the front arb/drop links are different on the SR but the glanza one will just bolt stright on in place of it Edited July 28, 2012 by micky boy Quote Link to post Share on other sites
ryan lang Posted July 28, 2012 Share Posted July 28, 2012 i think the hubs are different because of the abs arent they?or do the SR's have abs too? Quote Link to post Share on other sites
micky boy Posted July 28, 2012 Share Posted July 28, 2012 (edited) Yeah they different but he's asking if the glanza Hubs will bolt onto the SR front wishbones ect and they will as for as im awareGlanza wishbones are the same as the SRSR hubs are different because of the ABS and think they have a less splin count then the glanza hubs but not a 100% suresuspensions the same ect Edited July 28, 2012 by micky boy Quote Link to post Share on other sites
LukeSR Posted July 28, 2012 Share Posted July 28, 2012 SR's do not have ABS no ;) Quote Link to post Share on other sites
Starlet__SR Posted July 28, 2012 Share Posted July 28, 2012 I think the bottom arm bushes are a different size. The hub units can be swapped over as the ABS uses a pick up ring on the CVDay Quote Link to post Share on other sites
Ryan5793 Posted July 28, 2012 Author Share Posted July 28, 2012 Thanks guys, like I say I just wanna swap the whole front end set up so I can get bits power coated and polybushed, I've got a whiteline front anti roll bar to go on too Quote Link to post Share on other sites
Dickydan Posted August 26, 2012 Share Posted August 26, 2012 Does a glanza s have abs then?? Quote Link to post Share on other sites
zebedee Posted August 26, 2012 Share Posted August 26, 2012 Does a glanza s have abs then??Most do yes Quote Link to post Share on other sites
Dickydan Posted August 27, 2012 Share Posted August 27, 2012 Ok thanks wasnt too sure on the glanza s lol one last question does the glanza s share the same looms as the glanza v? Quote Link to post Share on other sites
Dan507 Posted August 27, 2012 Share Posted August 27, 2012 Does a glanza s have abs then??Yes, i can confirm this. I also have an ABS sticker on the rear window. Ok thanks wasnt too sure on the glanza s lol one last question does the glanza s share the same looms as the glanza v?Don't think so. it should be the same as a uk spec N/A Quote Link to post Share on other sites
zebedee Posted August 27, 2012 Share Posted August 27, 2012 The loom will be a mix of the two as you will not have all the sensors for the turbo but the looms will have ABS and air con on unlike the UK sr Quote Link to post Share on other sites
Dickydan Posted August 28, 2012 Share Posted August 28, 2012 So ifni tirbo convert an s id still need the engine and dash loom?? If i turbo*** Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.