russ78 Posted February 23, 2013 Author Share Posted February 23, 2013 (edited) ^^ Edited April 20, 2013 by russ78 Quote Link to post Share on other sites
russ78 Posted February 28, 2013 Author Share Posted February 28, 2013 (edited) last pieces of the puzzle turned up today many thanks iddyAlso picked up a WEPR SR-series mild steel manifold with externale w.gate outlet with a WEPR Screemer Pipe & WEPR Decat im not decided exactly what im gonna do turbo wise anymore but whatever it is its gonna be awesome Edited February 28, 2013 by russ78 Quote Link to post Share on other sites
Jim* Posted February 28, 2013 Share Posted February 28, 2013 Looking very interesting buddy! Quote Link to post Share on other sites
templar2007 Posted February 28, 2013 Share Posted February 28, 2013 looking good buddy Quote Link to post Share on other sites
Idrees Posted February 28, 2013 Share Posted February 28, 2013 You're welcome mate. Now get it built! Quote Link to post Share on other sites
russ78 Posted February 28, 2013 Author Share Posted February 28, 2013 You're welcome mate. Now get it built! that's the plan im off to the machine shop with the new pistons and block tomorrow Quote Link to post Share on other sites
jayc-glanza17 Posted February 28, 2013 Share Posted February 28, 2013 what one u using russel? glad its coming along fella.. im taking my one out properly for first time in 2013 sat night. Quote Link to post Share on other sites
russ78 Posted February 28, 2013 Author Share Posted February 28, 2013 smiths over burnt mills hes quoted me a pretty good price to Quote Link to post Share on other sites
Rock-Kick-Ass Posted March 1, 2013 Share Posted March 1, 2013 wossner way better than wiseco one's.. all the best in the build Quote Link to post Share on other sites
russ78 Posted March 14, 2013 Author Share Posted March 14, 2013 Finally my new 99 Spec Relfet Lights turned up from japan Quote Link to post Share on other sites
maddox710 Posted March 14, 2013 Share Posted March 14, 2013 Them Lights are soo awesome, i need a set in my life Quote Link to post Share on other sites
russ78 Posted March 14, 2013 Author Share Posted March 14, 2013 (edited) ;) Edited August 27, 2013 by russ78 Quote Link to post Share on other sites
jayc-glanza17 Posted March 14, 2013 Share Posted March 14, 2013 good progress russ..i just cba to do a owners blog.lol...but i might do one after had my Omex all fitted and mapped.. i have to show you one weekend once mines back out mate.. keep up good work, and dont loose paitience, it be worth it in end matey.. Quote Link to post Share on other sites
russ78 Posted March 14, 2013 Author Share Posted March 14, 2013 (edited) good progress russ.. i just cba to do a owners blog.lol... but i might do one after had my Omex all fitted and mapped.. i have to show you one weekend once mines back out mate.. keep up good work, and dont loose paitience, it be worth it in end matey.. you should do one jay it would make an awesome read block finally came back from the machine shop today so I been giving it a few coats of caliper red VHT paint, Oh and ordered my full engine gasket set from Toyota in Chelmsford today to,l its getting close now but its hard to not lose patience tbh Edited March 14, 2013 by russ78 Quote Link to post Share on other sites
russ78 Posted March 15, 2013 Author Share Posted March 15, 2013 2 coats later and engine block is now very Red Quote Link to post Share on other sites
Rock-Kick-Ass Posted March 16, 2013 Share Posted March 16, 2013 looking good russ.... the new lights look so coooooooool Quote Link to post Share on other sites
russ78 Posted March 19, 2013 Author Share Posted March 19, 2013 finally made a decision on what turbo im using on my forged setup I pretty sure its the way to go haha Quote Link to post Share on other sites
Liam_D Posted March 19, 2013 Share Posted March 19, 2013 Good choice of turbo mate Quote Link to post Share on other sites
jayc-glanza17 Posted March 19, 2013 Share Posted March 19, 2013 I cant say I persuaded you at all russ.LOL...looking good mate, you started building it yet? Quote Link to post Share on other sites
Got.boost Posted March 20, 2013 Share Posted March 20, 2013 hows the build coming russ ??? Quote Link to post Share on other sites
russ78 Posted March 20, 2013 Author Share Posted March 20, 2013 (edited) I've welded my wastegate shut on the td05 put new studs in it rotated it ordered water lines and oil lines for the TD05 from mike at TD and picked up my engine gasket set from chemsford Toyota oh and ordered a tial wastegate as well but not much engine buildings gone on yet sadly Edited August 27, 2013 by russ78 Quote Link to post Share on other sites
russ78 Posted March 27, 2013 Author Share Posted March 27, 2013 still waiting for a clear day to get on with the engine build but im still getting bits ready to go in I Grabbed some cheap Scooby seats already on starlet rails my bichon loves em WEPR Td05 external wastegate 100% completed waiting to go on Quote Link to post Share on other sites
russ78 Posted April 8, 2013 Author Share Posted April 8, 2013 picked up a Greddy Profec Type S so couldn't resist to add it to the build Quote Link to post Share on other sites
russ78 Posted April 20, 2013 Author Share Posted April 20, 2013 (edited) picked up some pretty impressive parts today Greddy Emanage Ultimate /inc Field harness & Sard 550 Injectors Massive thanks to jay finally met up and a top bloke highly recommended seller Edited August 27, 2013 by russ78 Quote Link to post Share on other sites
jayc-glanza17 Posted April 21, 2013 Share Posted April 21, 2013 cheers russ..like I said next weekend, I should b back in my glanza, so might be free to show you it.. if not bank hol weekend, me and Jamie are going to meet up.. let me know if you need a hand matey.. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.