Josh@TunerLifestyle Posted October 2, 2012 Share Posted October 2, 2012 i have plans to put a forged 5E in my glanza, i already have some parts for this but want to get a full list of EVERYTHING needed to build it.so far i have:forged 5E pistonsforged 5E rods5E block5E crankfull gasket setif anyone can throw up what else i need ( price included if possible) that will be grand!thanks! Quote Link to post Share on other sites
Socks Posted October 2, 2012 Share Posted October 2, 2012 Flywheel from a 3e... to use a 4e clutch I believe you need! Quote Link to post Share on other sites
Jamie1st Posted October 2, 2012 Share Posted October 2, 2012 Fire a message to Nick or Mike @ TDAnd it depends if you're building a complete new engine, or using parts from the old 4E. If its all fresh, a long way to go lolARP boltsHeadgasketACL BearingsWould be needed for a start, either way you decide to build it! Quote Link to post Share on other sites
Idrees Posted October 2, 2012 Share Posted October 2, 2012 Pistons and rodsBearingsOil and water pumpHeadboltsTiming belt kitThermostat, oil filterFuel filter and oil pressure switch wouldn't be a bad idea too (same with Aux belts)Clutch and flywheelEngine gasket set Quote Link to post Share on other sites
Josh@TunerLifestyle Posted October 2, 2012 Author Share Posted October 2, 2012 im planning on building a complete new engine so i can just drop it in and change the turbo kit over Quote Link to post Share on other sites
Jamie1st Posted October 2, 2012 Share Posted October 2, 2012 You'll need to source a head then, and know its in good nick.. Quote Link to post Share on other sites
Josh@TunerLifestyle Posted October 2, 2012 Author Share Posted October 2, 2012 yeh head is on the cards, getting one of starbucks car thursday Quote Link to post Share on other sites
daniel_g Posted October 2, 2012 Share Posted October 2, 2012 So it was you ^ !! Quote Link to post Share on other sites
Josh@TunerLifestyle Posted October 2, 2012 Author Share Posted October 2, 2012 So it was you ^ !!and now we know where the GT is going ;) Quote Link to post Share on other sites
daniel_g Posted October 2, 2012 Share Posted October 2, 2012 Wooops!!! Erm maybe we will see....Are you gonna build it yourself ? Quote Link to post Share on other sites
Josh@TunerLifestyle Posted October 2, 2012 Author Share Posted October 2, 2012 nope im in talks with Tuning Developments about it at the moment Quote Link to post Share on other sites
StarletRick Posted October 2, 2012 Share Posted October 2, 2012 its just the short block and all things that go with it you need. everything else will swap from the 4e.and a PAS pump if you plan on keeping that. they are different. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.