Skimmy237 Posted January 9, 2013 Share Posted January 9, 2013 Is there a speed limiter on my car ? As I had it in the massive road at my dads factory (3 miles) and I hit 110mph and it was ASIF it hit a limiter ? Just seein if I can get this off as I want to do track days Quote Link to post Share on other sites
Azz Posted January 9, 2013 Share Posted January 9, 2013 From facotry there is one set too 112mph Quote Link to post Share on other sites
smobey_sutton2 Posted January 9, 2013 Share Posted January 9, 2013 If your running a stock ECU then yes, you will be limited to 112mph. I'd recommend going down the management route. Tuning Developments will sort you out with their e-manage blue package Quote Link to post Share on other sites
micky boy Posted January 9, 2013 Share Posted January 9, 2013 (edited) You need a speedo converter mate that plugs into the gearbox Edited January 9, 2013 by micky boy Quote Link to post Share on other sites
Skimmy237 Posted January 9, 2013 Author Share Posted January 9, 2013 My speedo is converted to mph already, and ok how much is this gonna cost me ? Quote Link to post Share on other sites
smobey_sutton2 Posted January 9, 2013 Share Posted January 9, 2013 You need a speedo converter mate that plugs into the gearboxThought they just convert km/h to mp/h as the speed is read off the output shaft. Quote Link to post Share on other sites
morgey Posted January 9, 2013 Share Posted January 9, 2013 My speedo is converted to mph already, and ok how much is this gonna cost me ?How far around the clock does your needle go?Nearly to the end or about 2 3rds of the way?If nearly to the end they have just changed the dials/fascia not actually converted your speedoIf you fitted a convertor it would use the kph dials upto 180kph but actually instead of being 180kph it would be 180mph Quote Link to post Share on other sites
daniel_g Posted January 9, 2013 Share Posted January 9, 2013 I've not seen one for a while but you can get SLDs, speed limit defenders, wired into the loom to eliminate the limit. But if you are going to be getting a piggyback ECU then you wont have the factory limit anymore anyway !! Quote Link to post Share on other sites
morgey Posted January 9, 2013 Share Posted January 9, 2013 Im using a SLD about £120 + new may aswell save for a P & P or piggy back on these motors. For me it wasnt really an option Quote Link to post Share on other sites
smobey_sutton2 Posted January 9, 2013 Share Posted January 9, 2013 Go management all the way! Quote Link to post Share on other sites
Skimmy237 Posted January 9, 2013 Author Share Posted January 9, 2013 So what do I need to buy to do it right ? And how much will it be ? Quote Link to post Share on other sites
daniel_g Posted January 9, 2013 Share Posted January 9, 2013 Options are, Plug and play ecu, many benefits with these can fit them yourself, 5 mins research an you'll be clued up. Cost 500 + ish quid 2nd hand.Or go down the piggyback ECU route, EMB for example, someone needs to map it for you. Cost 550 at the cheapest and you will need it mapped again after every engine mod you do after the original map.Anyway both remove the speed limit, they do lots more than that though. Quote Link to post Share on other sites
james@cjperformance Posted January 9, 2013 Share Posted January 9, 2013 you can use a speed limit cut controller Quote Link to post Share on other sites
Skimmy237 Posted January 9, 2013 Author Share Posted January 9, 2013 you can use a speed limit cut controller Where do I get one of these ?All of that sounds fucking expensive haha^^ Quote Link to post Share on other sites
daniel_g Posted January 9, 2013 Share Posted January 9, 2013 As i said up way up there ^ you can get a SLD rather the management but you were talking about getting the car mapped the other day... Quote Link to post Share on other sites
Starbuck Posted January 9, 2013 Share Posted January 9, 2013 Slds can be picked up for about 50 second hand. Quote Link to post Share on other sites
Skimmy237 Posted January 9, 2013 Author Share Posted January 9, 2013 Ok man someone has mailed me thanks Will one from a gt turbo fit my glanza ? Quote Link to post Share on other sites
Starbuck Posted January 10, 2013 Share Posted January 10, 2013 They're not model specific. IiRC Quote Link to post Share on other sites
morgey Posted January 10, 2013 Share Posted January 10, 2013 (edited) No is long as it covers off toyota it should be fine, if you want to check just pop to fensports site and i think it states which version you need. Hks is type 2 i think but im not 100% sureNo it doesnt state which version but they are £123 + delivery on there Edited January 10, 2013 by morgey Quote Link to post Share on other sites
Azz Posted January 10, 2013 Share Posted January 10, 2013 James at cj has one for sale Quote Link to post Share on other sites
Skimmy237 Posted January 10, 2013 Author Share Posted January 10, 2013 James at cj has one for saleYea man think I'm gonna buy it Quote Link to post Share on other sites
har-vey Posted January 10, 2013 Share Posted January 10, 2013 emanage blue doesnt remove speed limit. i believe you have to go for ultimate to have that option.unless im wrong and i need mine sorting out but i had it done at tuning developments Quote Link to post Share on other sites
rasslenny Posted January 12, 2013 Share Posted January 12, 2013 im using a piggy back aem fic on my new build ... will that get rid of the speed cut??? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.