jason_l Posted February 20, 2013 Share Posted February 20, 2013 Hi Everyone, Well got the thing put together and rolled it out of the workshop. Tried starting it but it just revs up and down without me touching the throttle. I hope its a quick fix as i really want to drive the thing tomorrow morning, even if it is just around the carpark a few times at work. Will post up a video when i get in but does anyone have any idea's??? Have had a little look over the inlet manifold and everything seems ok. Im guessing its something like throttle position or timing or something. Any idea's would be masively helpfull. Thanks all, Jason Quote Link to post Share on other sites
Asad Posted February 20, 2013 Share Posted February 20, 2013 Vac leak? Quote Link to post Share on other sites
Amjad Posted February 20, 2013 Share Posted February 20, 2013 x2 Quote Link to post Share on other sites
Starbo Moorley Posted February 20, 2013 Share Posted February 20, 2013 X3 Quote Link to post Share on other sites
steve-gers Posted February 20, 2013 Share Posted February 20, 2013 Throttle cable? Quote Link to post Share on other sites
ryan lang Posted February 20, 2013 Share Posted February 20, 2013 deffo sounds like a vacuum leak dude Quote Link to post Share on other sites
morgey Posted February 20, 2013 Share Posted February 20, 2013 Air in the coolant system? Quote Link to post Share on other sites
Danza V Posted February 20, 2013 Share Posted February 20, 2013 I have same probelm... Quote Link to post Share on other sites
jason_l Posted February 20, 2013 Author Share Posted February 20, 2013 http://static.photobucket.com/player.swf?file=http://vid920.photobucket.com/albums/ad42/demon_buggy/video-2013-02-20-17-43-44_zps6d179a46.mp4 Quote Link to post Share on other sites
turbo Grant Posted February 20, 2013 Share Posted February 20, 2013 If it revving up and downi wouldn't say it's a vac leak whats the management on it? Quote Link to post Share on other sites
jason_l Posted February 20, 2013 Author Share Posted February 20, 2013 Standard ecu.Also has race tech inlet, standard ct9, very short exhaust, hks actuator. Quote Link to post Share on other sites
Addymk2 Posted February 21, 2013 Share Posted February 21, 2013 Check the vac pipe from your inlet manifold to dump valve if you have one mate And if that doesn't work try blanking off the BOV all together, I had this with a dodgey baileys where the spring was saggier than a witches tit Quote Link to post Share on other sites
Amjad Posted February 21, 2013 Share Posted February 21, 2013 He's sorted it for now, think it was a slightly open throttle causing the issue Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.