tatep82 Posted October 13, 2013 Share Posted October 13, 2013 just wondering if its safe to run my blitz plug & play when i go td04 has anyone had problems doing this before?good & bad points?safest way to do this? thanks matt Quote Link to post Share on other sites
RobSR Posted October 13, 2013 Share Posted October 13, 2013 Quite a few people seem to run the Blitz/Jams etc on TD04's at around 1bar. Just get the fuelling checked to make sure all is well and as should be. Quote Link to post Share on other sites
mikey4410 Posted October 13, 2013 Share Posted October 13, 2013 U can run a td04 on standard management at 10 psi fine so a plug in and play will happily run 14 psi.I would not go over 14 psi as injectors arent far of maxing at this. Quote Link to post Share on other sites
gibby1980 Posted October 24, 2013 Share Posted October 24, 2013 I read some even went to 18psi with this setup with an uprated fuel pump , FPR etc. A wideband is a must. I have a JAM ecu and once you go over 10psi, AFR is at 10 flat.....you can occasionally see 10.5-11 but that is quickly brought back to 10 flat on the wideband. Use proper fuel and change your fuel filter as well. Quote Link to post Share on other sites
Mk3 silver gt Posted October 24, 2013 Share Posted October 24, 2013 I'm running a race-tech td04 at 1bar with blitz ecu, had on for about year now and all is still well Of course get fueling checked to make sure Quote Link to post Share on other sites
gibby1980 Posted October 25, 2013 Share Posted October 25, 2013 What do your AFRs look like at 1bar? Quote Link to post Share on other sites
Mk3 silver gt Posted November 1, 2013 Share Posted November 1, 2013 It's about 11.5-8 wot Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.