kevmcc90 Posted January 22, 2014 Posted January 22, 2014 There is a slight crunch in my gearbox going into third now and then. Also has quick shift stick and paddle clutch fitted. Could this just be sorted by getting box reconditioned or? Any help or advice would be great. Quote
H_D Posted January 22, 2014 Posted January 22, 2014 it would be much cheaper to buy a second hand gearbox. Quote
TurboTobz Posted January 22, 2014 Posted January 22, 2014 Is it an aftermarket lsd.Clutch can be left in... quick shifts on the gear shifter unit not actually on the gearbox. If it's not an oem lsd you can just swap differntials. Quote
kevmcc90 Posted January 22, 2014 Author Posted January 22, 2014 I'm not sure if it's aftermarket mate. Not got much idea about gearboxes if I'm honest Quote
aidanep71 Posted January 22, 2014 Posted January 22, 2014 Try changing the oil first sometimes if it hasn't been changed in a while changing it can help it for another bit Quote
kevmcc90 Posted January 22, 2014 Author Posted January 22, 2014 Cheers mate will have a look at doing that. Is there a drain plug on the box? Quote
Ollieh17 Posted January 23, 2014 Posted January 23, 2014 theres a drain bolt on the bottom, its about 24mm , take this out to drain all the fluid. Then put the bolt back in. Theres another bolt on the side of the gearbox which i think is a 24 too? Take that out and undo the 17mm on the top of the gearbox visible in the engine bay. Then fill the oil up through this hole until fluid drips out the refill level hole on the side. Then put them all back together. Quote
EPnick22 Posted February 14, 2014 Posted February 14, 2014 I just changed mine, judging by the colour of the old stuff it hadnt been changed for a while lol mine used to crunch a bit when id change from 1st to 2nd if i had my foot flat, since putting new oil and a touch of zx1 in there its stupidly smooth and doesnt crunch Quote
kevmcc90 Posted February 14, 2014 Author Posted February 14, 2014 Zx1 mate?? I'm gonna do mine tomorrow before I see about getting the box stripped Quote
kevmcc90 Posted February 14, 2014 Author Posted February 14, 2014 Just seen what zx1 is mate haha. Will get some of that the morn. How much did you put in? Quote
EPnick22 Posted February 14, 2014 Posted February 14, 2014 I bought it for my engine, make sure you get the engine treatment box its £21 at halfords, its a 250ml bottle, with the gearbox you use 5% ratio to your oil so around 15ml, its minimal but it works for the engine you need 170ml seeing as its a 1.3l Quote
kevmcc90 Posted February 14, 2014 Author Posted February 14, 2014 Cheers mate hopefully it gelps Quote
EPnick22 Posted February 14, 2014 Posted February 14, 2014 The oil itself was just castrol 75w90 universal from halfords too, stuff is in a green bottke with a yellow sticker. box took something like 2.3 or 2.4 litres, just fill it on level surface and stop filling when it comes out the leveller hole (just incase you didnt know) Quote
kevmcc90 Posted February 14, 2014 Author Posted February 14, 2014 Yeah that's great cheers for all the info. Gonna have a bash at it tomorrow. Was it easy enough to fill from the engine bay? Quote
EPnick22 Posted February 14, 2014 Posted February 14, 2014 People say you have to take stuff like the radiator etc out to make room but i took my battery out and just poured it straight from the bottle with no mess lol the oil is quite thick so when you tip the bottle you have a few seconds til it comes out which is good Quote
kevmcc90 Posted February 14, 2014 Author Posted February 14, 2014 Great bud. That's my job for tomorrow Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.