Tmdep82mos Posted February 12, 2014 Posted February 12, 2014 As title says. Ideally no play. Many thanks mosley
Browner Posted February 13, 2014 Posted February 13, 2014 I have a very good td04 here welded and rotated ready to go
Tmdep82mos Posted February 13, 2014 Author Posted February 13, 2014 Send over some pics bud any play or smoke at all how many miles has it done mate
Browner Posted February 13, 2014 Posted February 13, 2014 I don't know how many miles it has done but there is no play and no smoke from the turbo, all the fins are dry etc its a very good tubby
Tmdep82mos Posted February 13, 2014 Author Posted February 13, 2014 Have you got any print outs of the power it makes bud
Browner Posted February 13, 2014 Posted February 13, 2014 Well obviously the power will depend on the map and what boost pressure it's running but it came off EP Dylan's 230bhp black Glanza
Tmdep82mos Posted February 13, 2014 Author Posted February 13, 2014 What boost was he running. I ran 243.9 at 1 bar
Browner Posted February 13, 2014 Posted February 13, 2014 That was at 1.1-1.2 bar I think. I might still have the dyno sheet here. A lot will depend on the tuner and also dfferent dyno will give slightly different power readings
Tmdep82mos Posted February 13, 2014 Author Posted February 13, 2014 Ok bud could you send me some pics & price then pls
Browner Posted February 13, 2014 Posted February 13, 2014 That's it there mate I'm looking £100 plus delivery
Phil Posted February 13, 2014 Posted February 13, 2014 big vf8 here td04 fitment (different oil feed but i can supply) Pm me if interested. Phil
akyakapotter Posted February 13, 2014 Posted February 13, 2014 mosley why not send your turbo up to liam d at midland turbos and get yours rebuilt ?
patman Posted February 13, 2014 Posted February 13, 2014 mosley why not send your turbo up to liam d at midland turbos and get yours rebuilt ?+1 good idea 👍
Phil Posted February 13, 2014 Posted February 13, 2014 (edited) the vf8...wouldnt run more than 1bar on a stock engine. forged? then wind it right up. Phil Edited February 13, 2014 by Philm
Tmdep82mos Posted February 13, 2014 Author Posted February 13, 2014 I'm running fully forged. Dont no much about turbos lol. What shall I do I want to run 300 no more really lol
akyakapotter Posted February 13, 2014 Posted February 13, 2014 the vf8...wouldnt run more than 1bar on a stock engine. forged? then wind it right up. Phil hes forged that thing is an animal ive been out for a play with it left me for dead
Tmdep82mos Posted February 13, 2014 Author Posted February 13, 2014 Lol it wasn't running right I need the boost controller set up & want a decent turbo so when she's on the rollers it won't give up the ghost the 1 I'm running at the min was only £20 off a mate but 1 fin is damaged but minimal play & no smoke. How much is a refurb
Phil Posted February 13, 2014 Posted February 13, 2014 VF8 should see 300 at 1.4bar id think. Indeed Phil
Tmdep82mos Posted February 13, 2014 Author Posted February 13, 2014 What is a vf8 can you add some pics & price
Phil Posted February 13, 2014 Posted February 13, 2014 (edited) hes forged that thing is an animal ive been out for a play with it left me for dead I believe it but he was td04 240+ right? stock engine stuff ;) Vf8 brutal in comparision Phil Edited February 13, 2014 by Philm
Phil Posted February 13, 2014 Posted February 13, 2014 (edited) What is a vf8 can you add some pics & price VF8 is an IHI turbo, oldschool Subaru turbo. Pm me an offer man. What kind of spool rpm on the vf8?? quicker than a td05 16g later than td04 Phil Edited February 13, 2014 by Philm
Recommended Posts