Scott-EP Posted February 27, 2014 Share Posted February 27, 2014 (edited) What a C**T of a job!Got a gutted cat to put on the Glanza attempted it the other day and when i realised you have to pull the manifold etc foward an inch or so to get the cat off because it touches the engine block without doing so i gave up.Just wanted to have a little moan! haha Edited February 27, 2014 by Scott-EP Quote Link to post Share on other sites
Glanza-Ben Posted February 27, 2014 Share Posted February 27, 2014 It can be done with manifold still attached we did one in under half a hour Quote Link to post Share on other sites
jamesglanza Posted February 28, 2014 Share Posted February 28, 2014 Yep as above I swap mine from de-cat to cat in around 30-40mins then back again after the Mot. Quote Link to post Share on other sites
JLF88 Posted February 28, 2014 Share Posted February 28, 2014 Quote Link to post Share on other sites
Scott-EP Posted March 1, 2014 Author Share Posted March 1, 2014 What did you do? Pull the stubs out so the cat can be dropped down?As with the stubs in place at the top of the cat it physically cannot come out Quote Link to post Share on other sites
Glanza-Ben Posted March 1, 2014 Share Posted March 1, 2014 What did you do? Pull the stubs out so the cat can be dropped down?As with the stubs in place at the top of the cat it physically cannot come outYou just unbolt the cat and remove don't have to undo anything else Quote Link to post Share on other sites
StarletSr? Posted March 1, 2014 Share Posted March 1, 2014 Did you unbolt the exhuast too? It will give you more movement but yea it doesnt take long only 7 bolts Quote Link to post Share on other sites
fremyjay Posted March 1, 2014 Share Posted March 1, 2014 as above its as easy as undoing the bolts and giving it a wiggle, i done mine and still had aircon ect in under 30mins on my own Quote Link to post Share on other sites
Scott-EP Posted March 2, 2014 Author Share Posted March 2, 2014 Im officially stumped then.. I'll do it again sometime this week and take pictures of why i cannot get it outAnd yes everything was undone, Exhaust down pipe etc Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.