bajansuperman Posted May 18, 2014 Share Posted May 18, 2014 can any one tell me what is the cause of this i changed plugs and wires so those r fine, my fpr is set at 20 stock injectors standard ecu wideband show car idle at 11s to 12s when all four cylinders are working and 17s and up when spark in cylinder one is out Quote Link to post Share on other sites
mikey4410 Posted May 18, 2014 Share Posted May 18, 2014 Well it has to be either dizzy cap , plug or lead dude.theres no way a coil pack can be at fault. Quote Link to post Share on other sites
bajansuperman Posted May 19, 2014 Author Share Posted May 19, 2014 new dizzy cap new plugs new wires Quote Link to post Share on other sites
gorganl2000 Posted May 21, 2014 Share Posted May 21, 2014 have you tested the other cylinders to see if spark is missing on those as well? if its just one cylinder, then its most likely the wire, plug or cap ------and you said you changed those Quote Link to post Share on other sites
bajansuperman Posted May 21, 2014 Author Share Posted May 21, 2014 (edited) have you tested the other cylinders to see if spark is missing on those as well? if its just one cylinder, then its most likely the wire, plug or cap ------and you said you changed those yea all four are working i pulled out each wire and did the screw driver test got shocked and all lol soo the wires r working changed plug to new then tried the old something so dont think its those also seeing liquid come out that cylinder by manifold Edited May 21, 2014 by bajansuperman Quote Link to post Share on other sites
bajansuperman Posted May 21, 2014 Author Share Posted May 21, 2014 plug gap? whats that explain Quote Link to post Share on other sites
Bristol glanza Posted May 21, 2014 Share Posted May 21, 2014 if it was me. take all 4 plus out, earth them on something on the car, turn the car over, check for spark on all 4. it maybe dizzy cap or leads.spark plug gap i am guessing? Quote Link to post Share on other sites
bajansuperman Posted May 21, 2014 Author Share Posted May 21, 2014 i did it by putting a long screw driver in the wire and laying it on the cam cover saw spark Quote Link to post Share on other sites
bajansuperman Posted May 21, 2014 Author Share Posted May 21, 2014 sounds like a boat and when i pull number one wire no change in idle Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.