Markgtni Posted June 13, 2014 Share Posted June 13, 2014 need a new exhaust system built for the car, had a blowout n had it welded but it seems to have had quite a lot of welds in the past and has started blowing out a bit onboost. so its time for an upgrade I've been priced roughly 380 by a local place fitted and all but want to shop around few diferent places 1st before I choose anywere, would appreciate any help... Quote Link to post Share on other sites
Chris Green Posted June 14, 2014 Share Posted June 14, 2014 Why not order an off the shelf one mate? Quote Link to post Share on other sites
Markgtni Posted June 14, 2014 Author Share Posted June 14, 2014 i would if it would be handier and less costly?, its just cuz i was told to shop round few places and 1st place i was sent to had a look at it and said i need new system from front to back, and gave me a price and said id get to choose between 2 or 3 diffrnt notes before ichoose and get to pick from any of the tailpipes too wich i thought sounded good as it would be a 1 off job... Quote Link to post Share on other sites
Jamie5414 Posted June 14, 2014 Share Posted June 14, 2014 (edited) A bit over your budget, but their new system is really nice (see lower down in the thread). You get what you pay for at the end of the day. Click Edited June 14, 2014 by Jamie5414 Quote Link to post Share on other sites
Chris Green Posted June 14, 2014 Share Posted June 14, 2014 As above, a zisco one would be the ticket. S/S japspeed ones can be picked up for £60 - £150 on eBay. Quote Link to post Share on other sites
m_prior10 Posted June 16, 2014 Share Posted June 16, 2014 Dees exhausts newtonabbey are gud I got a full stainless steel from decat back to my back box for 180 quid and get warranty with it and all Quote Link to post Share on other sites
spudep91 Posted June 26, 2014 Share Posted June 26, 2014 Street racer bangor pal. Does good work check hes fb page out Quote Link to post Share on other sites
Nanglebadger Posted June 26, 2014 Share Posted June 26, 2014 I used Canavans in Lurgan for my S/S cat back system. I provided the HKS back box and they did the piping and mid (bullet) box. talking about 4 years ago now and was £260 then, but steep IMO but looks pretty decent work TBF. Phil. Quote Link to post Share on other sites
Phil Posted June 26, 2014 Share Posted June 26, 2014 Pick you jap back box of choice up for 100 ish quid. and head to Dees or Street Racer depending whats closer. the welder at street racer does rally prep etc and seems to know what he is at. or buy the Zisco/RW developments system its pretty awesome Phil Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.