ryan22laird Posted July 4, 2014 Share Posted July 4, 2014 Item For Sale:for sale is my 4e forged engine sadly the bottom ends started knocking two days ago it's fine on idle just when you rev over 3k it start knocking a little the car was stopped straight away after this and the cranks was checked it has slight scoring so will need a reground and new shells this engine was built a year and a half ago a bought it from someone on this a didn't get recipes for the build but a got loads of pictures of when the engine was built also got pictures with sump off that was only taken yesterday Item Condition & Description:Genuine toyota oil pumpwater pump new timing belt kitnew engine seal kit i.e (crank seal, rear main, cam seal)& gaskets crank & flywheel lightened & balanced when block was boredwiseco 74.5mm forged pistonsscat forged rods (block notched to fit them)ACL racing big ends, mains & thrust bearingsathenna 1.2mm metal headgasket crusie valve springsvalves lapped inuprated valve stem seals NGK iridium heat range 8 spark plugsarp headbolts Price:900Pictures: Payment & Shipping Details: Quote Link to post Share on other sites
ryan22laird Posted July 4, 2014 Author Share Posted July 4, 2014 (edited) Edited July 4, 2014 by ryan22laird Quote Link to post Share on other sites
Adam-Gt- Posted July 4, 2014 Share Posted July 4, 2014 What has caused it to start chewing bearings mate ?? Quote Link to post Share on other sites
_shaun_ Posted July 4, 2014 Share Posted July 4, 2014 (edited) The picture you've stuck up is that not a set of headstuds not bolts who built the engine? Edited July 4, 2014 by _shaun_ Quote Link to post Share on other sites
ryan22laird Posted July 4, 2014 Author Share Posted July 4, 2014 The picture you've stuck up is that not a set of headstuds not bolts who built the engine?The picture you've stuck up is that not a set of headstuds not bolts who built the engine?The pictures a have put up was the ones a got from the boy that a got the engine from he said someone from glasgow built it his nane was dave borrows built it Quote Link to post Share on other sites
TurboTobz Posted July 4, 2014 Share Posted July 4, 2014 900 for a paper weight? Quote Link to post Share on other sites
TurboTobz Posted July 4, 2014 Share Posted July 4, 2014 I paid £200 for fucked forged lump with perfect wiseco pistons and one damaged pauter rod. Quote Link to post Share on other sites
ryan22laird Posted July 4, 2014 Author Share Posted July 4, 2014 I paid £200 for fucked forged lump with perfect wiseco pistons and one damaged pauter rod. you got a good deal there then ae mines not going for any less that 800 if it doesn't sell Al fix over time skint at the moment or a would fix it myself Quote Link to post Share on other sites
_shaun_ Posted July 5, 2014 Share Posted July 5, 2014 (edited) never mind this is actually boost junkies engine. he built it and moved to canada so the car was garaged for like 3 years.someone must have bought the car and broke it Edited July 5, 2014 by _shaun_ Quote Link to post Share on other sites
ryan22laird Posted July 5, 2014 Author Share Posted July 5, 2014 never mind this is actually boost junkies engine. he built it and moved to canada so the car was garaged for like 3 years.someone must have bought the car and broke it the boy a bought it from was alex bennet he said the car was garaged like but didn't say for 3 year he said the car belonged to his cousin that moved to Canada and he was breaking the car for him Quote Link to post Share on other sites
callum tgtt Posted July 5, 2014 Share Posted July 5, 2014 U got shafted. Forged engines should last ages Quote Link to post Share on other sites
rinseep82 Posted July 5, 2014 Share Posted July 5, 2014 U got shafted. Forged engines should last agesNot allways the case!! Depends who has built it and if it has been built properly ask any tuner most of them will say they have to repair more forged engines than standard ones because of shoddy workmanship just because it's forged dosent mean it's been built to the standard it should Quote Link to post Share on other sites
Starbuck Posted July 5, 2014 Share Posted July 5, 2014 Deffo not the case and mine was built by TD. Quote Link to post Share on other sites
_shaun_ Posted July 5, 2014 Share Posted July 5, 2014 If you look in the sales section he's got the add for him trying to sell the whole car. He's also got a build thread but it was waaay back in 2011 I met him and he was just moving away Quote Link to post Share on other sites
ryan22laird Posted July 5, 2014 Author Share Posted July 5, 2014 If you look in the sales section he's got the add for him trying to sell the whole car. He's also got a build thread but it was waaay back in 2011 I met him and he was just moving away just spoke to boost junkie basically he just told me he sold his unfinished ep82 to alex bennet he advised alex to get the oil pump changed as it wasn't getting oil pressure so the wee fanny has sold me a fucked engine why can people do that to someone his day will come tho engines not fir sale anymore please lock Not for sale anymore please lock Quote Link to post Share on other sites
ryan22laird Posted July 12, 2014 Author Share Posted July 12, 2014 Selling up so this is for sale £750 takes it needs a oil pump big end bearings and the crank reground Quote Link to post Share on other sites
Gilly Posted July 12, 2014 Share Posted July 12, 2014 Has the crank been reground before it was forged? Quote Link to post Share on other sites
ryan22laird Posted July 13, 2014 Author Share Posted July 13, 2014 Has the crank been reground before it was forged? bah mate its standard shells that's in it just now Quote Link to post Share on other sites
ryan22laird Posted July 14, 2014 Author Share Posted July 14, 2014 Bump Quote Link to post Share on other sites
5e colin Posted July 14, 2014 Share Posted July 14, 2014 sell your engine in bits mate that way you could reach the mark ???? Quote Link to post Share on other sites
masonep91 Posted July 14, 2014 Share Posted July 14, 2014 I'll have the head bolts and pistons if you decide to split Quote Link to post Share on other sites
ryan22laird Posted July 15, 2014 Author Share Posted July 15, 2014 sell your engine in bits mate that way you could reach the mark ???? that's what am going to do mate Quote Link to post Share on other sites
5e colin Posted July 15, 2014 Share Posted July 15, 2014 pm coming your way so mate Quote Link to post Share on other sites
ryan22laird Posted July 18, 2014 Author Share Posted July 18, 2014 Bump Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.