Turbo Goose Posted July 5, 2014 Share Posted July 5, 2014 Hi guys, just wondering if a chra from a mitsubushi shogun is the same as one from an impreza? http://www.ebay.co.uk/itm/for-Mitsubishi-Pajero-Shogun-Delica-2-8L-TD04-TF035-Oil-Turbo-CHRA-Cartridge-/321451243231?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4ad7fcb6df Quote Link to post Share on other sites
seab Posted July 7, 2014 Share Posted July 7, 2014 Flanges will be the same. tf035 is slightly smaller than impreza td04 Quote Link to post Share on other sites
_shaun_ Posted July 7, 2014 Share Posted July 7, 2014 The Mitsubishi flanges on the turbo are different Quote Link to post Share on other sites
aaddzz123 Posted July 7, 2014 Share Posted July 7, 2014 I thought that the TD04 was made by Mitsubishi anyway? Quote Link to post Share on other sites
richardc9052 Posted July 7, 2014 Share Posted July 7, 2014 he isnt asking about the flanges lads.. Im not sure if the chra will fit but i have heard of volvo comp housings and comp wheels being used and they are mitsubishi fitment so the chra should fit but again i cant be sure Quote Link to post Share on other sites
Turbo Goose Posted July 7, 2014 Author Share Posted July 7, 2014 Sound mate cheers, they look the same Quote Link to post Share on other sites
akyakapotter Posted July 7, 2014 Share Posted July 7, 2014 Liam d is the man to ask Quote Link to post Share on other sites
GP82 Posted July 7, 2014 Share Posted July 7, 2014 (edited) I don't think it will, infact i am 90% sure it won't. The way the compressor housing and turbine housing from a Subaru Td04 mate to the chra I don't think will fit. Also You need to check the size of the compressor and turbine wheels, I doubt they are the same size so to fit the housing's from a Subaru turbo onto MHI and vice versa. A MHI TD04 and Subaru TD04 are very different like trumpets and trombones. Edited July 7, 2014 by GP82 Quote Link to post Share on other sites
seab Posted July 11, 2014 Share Posted July 11, 2014 If you can get me part number I will have a look in work. As I have the MHI catalogue in my desk MHI don't give much away in their nomenclature so it's hard to tell wheel size and trim to say whether the wheels will fit the end housings Quote Link to post Share on other sites
maddox710 Posted July 11, 2014 Share Posted July 11, 2014 Waiting for liam_d reply Quote Link to post Share on other sites
Liam_D Posted July 12, 2014 Share Posted July 12, 2014 Flanges will be the same. tf035 is slightly smaller than impreza td04THIS! ^ if it's of a shogun, chances are it's a TF035 and will therefore be slighty smaller than a td04. I'm also pretty sure that some shogun stuff is only oil cooled, whereas a impreza td04 is oil and water cooled. Would depend on part numbers though as there's hundreds of variations that people don't know about. Quote Link to post Share on other sites
richardc9052 Posted July 12, 2014 Share Posted July 12, 2014 If it's a tf036 chra then the td04 housings will fit won't they? Quote Link to post Share on other sites
Liam_D Posted July 12, 2014 Share Posted July 12, 2014 Potentially but it's the shaft/compressor wheel dimension that'll be different and therefore it'll be pointless if they don't fit correctly Quote Link to post Share on other sites
richardc9052 Posted July 12, 2014 Share Posted July 12, 2014 Ok cool, good to know Quote Link to post Share on other sites
seab Posted July 12, 2014 Share Posted July 12, 2014 THIS! ^ if it's of a shogun, chances are it's a TF035 and will therefore be slighty smaller than a td04. I'm also pretty sure that some shogun stuff is only oil cooled, whereas a impreza td04 is oil and water cooled. Would depend on part numbers though as there's hundreds of variations that people don't know about.Thanks for backing me up Liam. I think people on here forget i design these things for a living :-) Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.