morgan Posted August 8, 2015 Share Posted August 8, 2015 ok so I have seen a few threads on this but no one really saying what I need to know. My stock CT9 needs replacing, I was just going to replace with a reconditioned stock CT9 but also wanting to go with a TD04 in the future. So to save me spending money on a CT9 that will only be in there for 6 months or so could I put on a TD04 but keep the boost at stock pressures (0.6 bar I think?) So my question is can I run a TD04 on stock EVERYTHING so ecu, fuel pump, the lot as long as I'm not adding any more boost. I'm not on the hunt for power just yet, just a working carThanks for any input Quote Link to post Share on other sites
5e colin Posted August 8, 2015 Share Posted August 8, 2015 7 psi personal experiance tdo4 was in my gtt more and it ran lean worked good Quote Link to post Share on other sites
Ollieh17 Posted August 8, 2015 Share Posted August 8, 2015 (edited) Ran 0.8 bar on a td04 on glanza, standard ecu etc same as you. Fuelled fine, i did have a wideband though Edited August 8, 2015 by Ollieh17 Quote Link to post Share on other sites
morgan Posted August 8, 2015 Author Share Posted August 8, 2015 Was thinking of getting a wide band to be on the safe side Quote Link to post Share on other sites
5T4R7ET N/A Posted August 8, 2015 Share Posted August 8, 2015 Boost it 0.5 on a good actuator like a HKS.Mine fuelled fine at 0.5 Quote Link to post Share on other sites
morgan Posted August 8, 2015 Author Share Posted August 8, 2015 Going with an Tia 38mm external wastegate so if I put in the spring for 0.5 bar I will be fine until I get a new ECU, FPR and file pump ? In which case I can add a boost controller to set it to what I need Quote Link to post Share on other sites
maddox710 Posted August 9, 2015 Share Posted August 9, 2015 I ran mine @1bar 232bhp 233lb-ftHks pfcon+gcc ecu Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.