neilsmith Posted January 25, 2016 Posted January 25, 2016 Is everyone's clutch a nightmare to bleed or do I have a problem somewhere with mines? Neil Quote
Starlet__SR Posted January 25, 2016 Posted January 25, 2016 Use an eazi bleed, makes it a doddle lolDay Quote
daniel_g Posted January 25, 2016 Posted January 25, 2016 Should be easy man, you got a fluid leak somewhere? Quote
neilsmith Posted January 25, 2016 Author Posted January 25, 2016 No signs of any fluid leaks, cars been sitting for 18 months though, put a new slave cylinder on and going to flush some fresh fluid through it tomorrow with a syringe Quote
richardc9052 Posted January 26, 2016 Posted January 26, 2016 I had this problem. Remove the master cylinder and hand prime it with fluid. Then refit and try to bleed. If you still have problems theb you might need a new master. Quote
gorganl2000 Posted January 29, 2016 Posted January 29, 2016 what color is the fluid in the master cylinder reservoir?...could be a problem from this unit not building any pressure due to worn seals/rubbers or cylinder ware Quote
5e colin Posted January 29, 2016 Posted January 29, 2016 your cylinder is probly leaking on the fire wall and leaking inside under the carpet have a look there on the inside if its leaking Quote
neilsmith Posted January 29, 2016 Author Posted January 29, 2016 Ok will check it tonight, got it bled up to a good pedal and now it's lost again Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.