nikhilkamdar12

bump

bump

bummp

Hi, Yes mate still here, what is your postcode so I can get an accurate shipping quote? Nik

Bump

Bump

bump

bump

Yes, I would say its a good thing to do regardless if your running big power or stock. You can spend your money on other things such as FMIC or the likes before tackling the ventilation system thoo The benefits come more as you run more power as the engine can breath way more as the 4EFTE does not have a crank case breather, only what is on the rocker cover.

As 5e colin says, from the PCV (Positive Crankcase Pressure) valve instead of going back into your intake all the fumes and nasty shit for emissions to get re-burned you route it to your catch can. The benefit over not doing it is that it help keep the inside of your intake manifold a lot cleaner and the combustion cleaner too as you can imagine that black oily stuff in the catch can is getting burned inside the engine if the catch can wasn't there. Hope this helps

If still here end of the month I'll take this

Bumpppppp

Upp

Bump

bump

So, been a long time since I last updated this. I have decided to go for a modern standalone ECU so have decided to get the Haltech Platinum Sport 1000 I am currently getting a crank pulley with trigger wheel and bracket made up so the ECU knows exactly where the pistons are and know when to fire. I have stripped out all the old wiring such as fueling, ignition, air con wiring the lot and the new loom and fuse box will all be supplied by Haltech. Currently waiting for the Haltech to be delivered and in the meantime I am preparing the ignition system... K20 coils... Got some aluminium hex spacers to make the bracket... Initial line up with the spacers, but needed some trimming and some machine work to fit 100% as they were sitting way to high!... Went to the machine shop and he made it completely flat for me and I also grinded down the spacers, and you can also see it's sitting a lot lower now as it's meant to... All sitting flush now and all spacers grinded to the same height I found the center of each spacer and used a punch for a guide for alignment. so when it comes to welding, it all gets welded in the right place.

bumppppp

Offers

Nobody want this?

Bump

All done, found one and bought

Hi, Need a crank pulley for a Glanza 4EFTE as myHermes has lost mine in the post!! Fucking proper annoyed now! If anyone has one for sale that is in good condition that has MINIMAL damage to it if not any I will take it Regards Nik

Bump

Bump

bump